Graphene is a promising electrode material not only due to its intrinsic properties like good electrical conductivity, high mechanical strength and high chemical stability, but also because of its high theoretical surface area of 2630 m 2 g −1 . In this report, the effect of CVD parameters to the growth of high quality graphene on metal substrates by using plasma enhanced chemical vapor deposition (PECVD) was extensively studied. Interestingly, synthesizing high quality graphene by PECVD technique is not only depending on the CVD parameters, but also depending on the catalysts and its plasma sources. It was found that Ni and Cu are the most favored metal catalysts for PECVD graphene growth. With high solubility of carbon (> 0.1 at. %), Ni effectively promote the growth of multilayer graphene by PECVD. However, large-area synthesis has made relatively inexpensive Cu as one of the most attractive substrates for monolayer graphene growth. Further details on the potential use of different transition metal catalysts in synthesizing graphene and consequently the specific usage of graphene based devices are discussed in this report.

No abstract

No abstract

The iron catalyst nanoparticles were prepared on silicon wafers by solution process, which first spins coat the solution of iron (III) nitrate nonahydrate and colloidal solution, and then are heated to obtain the formation of iron nanoparticles. The effects of different spin speed and heat treatment parameters during the solution process were investigated. As a result, the smallest thickness of the Fe catalyst thin films is 78 nm, and the smallest Fe catalyst nanoparticles, i.e. 9?67 nm, were obtained at the highest spin speed of 8000 rev min 21 and 500uC. The uniformity of the thin films was also found to increase with increasing spin speed. The particle and thickness analysis was performed by means of field emission scanning electron microscopy.

In this study, a mixture of activated carbon (AC) and graphene (G) was coated onto the stainless steel (SS) mesh to produce an electrode for the electrochemical capacitor (EC). Different materials, such as carbon nanotube (CNT) mixed with G, were also used in this experiment to compare the electrochemical properties of both electrodes. The electrochemical properties of the electrode were determined by using cyclic voltammetry (CV). The CV curves of the AC/G electrodes showed good capacitive behaviour, and the highest capacitance values obtained for AC/G and CNT/G electrodes in 1M H2SO4 at 1 mVs-1 were 13 Fg-1 and 4.34 Fg-1, respectively. Meanwhile, the highest capacitance values obtained in 6M KOH at 1 mVs-1 were 14 Fg-1 and 12.07 Fg-1 for AC/G and CNT/G electrodes, respectively.