A new layered organic-inorganic nanohybrid material in which an agrochemical, 4-(2,4dichlorophenoxy)butyrate (DPBA) is intercalated into inorganic interlayers of zinclayeredhydroxide (ZLH) was synthesized by direct reaction of aqueous DPBA solution with zinc oxide. The resulting nanohybrid is composed of the organic moieties, DPBA sandwiched between ZLH inorganic interlayers. The nanohybrid afforded well ordered crystalline layered structure, a basal spacing of 29.6 Å, 23.5% carbon (w/w) and 47.9% (w/w) loading of DPBA. FTIR study shows that the absorption bands of the resulting nanohybrid composed the FTIR characteristics of both the DPBA and ZLH which further confirmed the intercalation episode. The intercalated organic moiety in the form of nanohybrid is thermally more stable than its sodium salt. Scanning electron micrograph shows the ZnO precursor has very fine granular structure and transformed into a flake-like when the nanohybrid is formed. This work shows that the nanohybrid of DPBA-ZLH can be synthesized using simple, direct reaction of ZnO and DPBA under aqueous environment for the formation of a new generation of agrochemical.

The feasibility of durian tree sawdust (DTS), coconut coir (CC) and oil palm empty fruit bunch (EFB) as low-cost biosorbents for the removal of Cu(II), Pb(II) and Zn(II) ions from aqueous solutions was investigated. The effects of solution pH and initial metal concentration on adsorption capacity were examined in batch experiments. The affinity and the adsorption capacity of DTS, CC and EFB were evaluated. The adsorption behaviour of Cu(II), Pb(II) and Zn(II) ions onto DTS, CC and EFB was described using Freundlich and Langmuir isotherm models. The separation factor (RL) analysis suggests that the removal of metal ions onto three agricultural wastes studied was favourable. The maximum adsorption capacities (Q) estimated from the Langmuir isotherm model for Cu(II), Pb(II) and Zn(II) were 18.42, 20.37 and 22.78 mg/g for DTS, 18.38, 37.04 and 24.39 mg/g for CC, and 26.95, 37.59 and 21.19 mg/g for EFB, respectively. The characterisation studies were carried out using Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectrometer (EDX) and Fourier Transform Infrared Spectrometer (FTIR). The surface morphology of the biosorbents changed significantly following interaction with metal ions. The primary adsorption mechanism was complexation between metal ions and binding sites of biosorbents. Both hydroxyl and amine groups are the main binding sites in DTS, CC and EFB.

The efficacy of coconut tree sawdust (CTS), eggshell (ES) and sugarcane bagasse (SB) as alternative low-cost biosorbents for the removal of Cu(II), Pb(II) and Zn(II) ions from aqueous solutions was investigated. Batch adsorption studies were carried out to evaluate the effects of solution pH and initial metal concentration on adsorption capacity. The optimum biosorption condition was found at pH 6.0, 0.1 g biomass dosage and at 90 min equilibrium time. The adsorption data were fitted to the Freundlich and Langmuir isotherm models. The adsorption capacity and affinity of CTS, ES and SB were evaluated. The Freundlich constant (n) and separation factor (RL) values suggest that the metal ions were favourably adsorbed onto biosorbents. The maximum adsorption capacities (Q) estimated from the Langmuir isotherm model for Cu(II), Pb(II) and Zn(II) were 3.89, 25.00 and 23.81 mg/g for CTS, 34.48, 90.90 and 35.71 mg/g for ES, and 3.65, 21.28 and 40.00 mg/g for SB, respectively. The characterisation studies were performed using Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectrometer (EDX) and Fourier Transform Infrared Spectrometer (FTIR). Interaction with metal ions led to the formation of discrete aggregates on the biosorbents surface. The metal ions bound to the active sites of the biosorbents through either electrostatic attraction or complexation mechanism.

No abstract

No abstract