No abstract

This paper aims to examine the nonlinear flexural behavior of continuous RC beam specimens strengthened with fabric-reinforced cementitious matrix (FRCM) composites through experimental testing and numerical modeling. A total of nine two-span RC beam specimens were constructed and tested. Test parameters included the type of FRCM (carbon (C-FRCM) and polyparaphenylene benzobisoxazole (PBO-FRCM), location of strengthening (sagging and hogging regions) and number of FRCM layers (two and four layers). Test results indicated that sagging strengthening resulted in a strength gain in the range of 17 to 29%, whereas hogging strengthening increased the load capacity by 9 to 17%. The use of C-FRCM resulted in a higher strength gain than that provided by PBO-FRCM composites. Specimens strengthened with PBO-FRCM exhibited, however, higher ductility and deformational capacity than those of their counterparts strengthened with C-FRCM. Doubling the number of FRCM layers resulted in no or insignificant increase in the load capacity but reduced the beam ductility. Specimens strengthened in the sagging regions exhibited moment redistribution ratios of 13 to 26% between the hogging and sagging regions. Insignificant moment redistribution was recorded for the specimens strengthened in the hogging region. Three-dimensional (3D) numerical simulation models, with and without an interfacial bond-slip law at the fabric–matrix interface, were developed. The inclusion of the bond-slip law in the modeling had an insignificant effect on predicted response. Although the models tended to underestimate the deflection, the predicted load capacities were within a 12% error band. Numerical findings were in agreement with those obtained from laboratory testing.

No abstract

The M7.5 earthquake of 26 October 2015 resulted due to reverse faulting at an intermediate depth of 210 km within the northeast-trending tabular zone underneath the Hindu Kush region, with its epicenter located 45 km southwest of Jarm in Afghanistan. In Pakistan alone, the earthquake and subsequent aftershock swarm resulted in 280 fatalities, injuries to 1,770 persons, and notable damage to 109,123 buildings. A synopsis of observations is presented herein, covering details about seismotectonics, strong motion characteristics, damage statistics, and typical building failure modes. Building damage was observed to mostly concentrate in vulnerable rural and old unreinforced masonry buildings, with aspects such as complete or partial out of plane collapse of walls, collapse of roofs due to loss of seating, shear cracking in masonry walls/panels, shear and flexural damage in masonry spandrels, cracking at infill-frame interface, damage at building corners, pounding damage, toppled minarets, and damage due to ground settlement.

No abstract