Partitioning at phase boundaries of complex steels is important for their properties. We present atom probe tomography results across martensite / austenite interfaces in a precipitation-hardened maraging TRIP steel (12.2 Mn, 1.9 Ni, 0.6 Mo, 1.2 Ti, 0.3 Al; at.%). The system reveals compositional changes at the phase boundaries: Mn and Ni are enriched while Ti, Al, Mo, and Fe are depleted. More specific, we observe up to 27 at.% Mn in a 20 nm layer at the phase boundary. This is explained by the large difference in diffusivity between martensite and austenite. The high diffusivity in martensite leads to a Mn-flux towards the retained austenite. The low diffusivity in the austenite does not allow accommodation of this flux. Consequently, the austenite grows with a Mn-composition given by local equilibrium. The interpretation is based on DICTRA and mixed-mode diffusion calculations (using a finite interface mobility).

The periodic shell structure and surface reconstruction of metallic FePt nanoparticles with icosahedral structure has been quantitatively studied by high-resolution transmission electron microscopy with focal series reconstruction with sub-angstrom resolution. The icosahedral FePt nanoparticles fabricated by the gas phase condensation technique in vacuum have been found to be surprisingly oxidation resistant and stable under electron beam irradiation. We find the lattice spacing of (111) planes in the surface region to be size dependent and to expand by as much as 9% with respect to the bulk value of Fe52Pt48. Controlled removal of the (111) surface layers in situ results in a similar outward relaxation of the new surface layer. This unusually large layerwise outward relaxation is discussed in terms of preferential Pt segregation to the surface forming a Pt enriched shell around a Fe-rich Fe/Pt core.

No abstract