Electric vehicles (EVs) represent a promising green technology for mitigating environmental impacts. However, their widespread adoption has significant implications for management, monitoring, and control of power systems. The integration of renewable energy sources (RESs), commonly referred to as green energy sources or alternative energy sources, into the network infrastructure is a sustainable and effective approach to addressing these matters. This paper provides a comprehensive review of the integration of RESs and EVs into power systems. The bibliographic analysis revealed that IEEE Access had the highest impact among journals. In order to enhance the classification of the reviewed literature, we have provided an analytical summary of the contributions made by each paper. The categorization facilitated the recognition of the primary objectives explored in the reviewed works, including the classification of EVs and RESs, the incorporation of RESs and EVs into power systems with an emphasis on emissions, the establishment of EV charging stations and parking facilities, EV batteries and battery energy storage systems, strategies for managing the integration of RESs with EVs, EV aggregators, and the financial implications. In order to provide researchers with a valuable synopsis of the implementation particulars, the papers were bifurcated into two primary classifications, namely mathematical algorithms and heuristic algorithms. The mixed integer linear programming algorithm and particle swarm optimization algorithm were commonly utilized formulations in optimization. MATLAB/Simulink was the primary platform used for executing a considerable portion of these algorithms, with CPLEX being the dominant optimization tool. Finally, this study offers avenues for further discourse and investigation regarding areas of research that remain unexplored.

The design of longer-lasting products, such as domestic electric appliances, is a key-stone approach of the circular economy to reduce the use of non-reusable materials and the number of wastes to be managed at the end of the product’s life as well as to extend it. The manufacturing of modern electric appliances includes the incorporation of printed circuit boards (PCBs). PCBs provide mechanical support and electrically connect electrical or electronic components using conductive trackpads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. This paper proposes a PCB maintenance framework, fully compliant with the “Right to Repair” concept, considering the impact of their aging failures based on measurements made on them, as well as the repair and replacement costs of their components. Herein, we present an algorithm that assesses the problem of handling the repair and replacement cost corresponding to specific failures while ensuring that the total cost of repair does not exceed a predefined value. This is achieved through an integer linear programming (ILP) formulation which maximizes the benefit to the life expectancy, Li, of an appliance, constrained by a customer’s limited budget. The proposed methodology is tested with different PCBs and considers different types of appliances. More specifically, two cases concerning PCBs of washing and dishwasher machines are studied to examine the dependency of the solutions on the aging rate of their various components. The simulation results show that considering a medium budget, after 3 years, we can achieve a health benefit of 92.4% for a washing machine’s PCB, while for a dishwasher’s PCB, the health benefit drops to 86.3%.

No abstract

No abstract

The physicochemical process during the operation of fusible wires under high currents densities presents complicity and seems not to be completely known. The work presented in this paper investigates the fusion process of exploding wires using common industrial power supply directly feed from the network of 50Hz. The measured magnitudes were the voltage drop and the current waveforms during the current interruption process and the total duration of the fusion. The measurements were performed through fast digital oscilloscopes connected with PC are presented and the observed phenomena are investigated. The total time duration (prearcing and arcing periods of fusion) of the fusion process was measured and the results for different current densities and lengths of the thin wire elements are presented and analysed.