Microfibrillated cellulose (MFC), also referred to as nanocellulose, is one of the most promising innovations for forest sector. MFC is produced by fibrillating the fibres under high compression and shear forces. In this study we evaluated the worker exposures to particles in air during grinding and spray drying of birch cellulose. Processing of MFC with either a friction grinder or a spray dryer did not cause significant exposure to particles during normal operation. Grinding generated small amount of particles, which were mostly removed by fume hood. Spray dryer leaked particles when duct valve was closed, but when correctly operated the exposure to particles was low or nonexistent. To assess the health effects of the produced MFC, mouse macrophages and human monocyte derived macrophages were exposed to MFC and the viability and cytokine profile of the cells were studied thereafter. No evidence of inflammatory effects or cytotoxicity on mouse and human macrophages was observed after 6 and 24 h exposure to the materials studied. The results of toxicity studies suggest that the friction ground MFC is not cytotoxic and does not cause any effects on inflammatory system in macrophages. In addition, environmental safety of MFC was studied with ecotoxicity test. Acute environmental toxicity assessed with kinetic luminescent bacteria test showed high NOEC values ([100 mg/l) for studied MFC. However, MFC disturbed Daphnia magna mobility mechanically when the test was performed according to the standard procedure.

No abstract

This paper deals, with cationically modified NanoFibrillar Cellulose (cat NFC), obtained by reacting a dissolving pulp with 2,3-epoxypropyl trimethylammonium chloride (EPTMAC). The cat NFC was thoroughly characterized in terms of morphology and physical properties. The dimensions of individual cellulose nanofibrils were determined by atomic force microscopy (AFM) imaging in water and in air. Fibrils as thin as 0.8-1.2 nm were observed in water. The fibril diameter changed upon drying and the average size was further quantified by image analysis. The experiments showed the importance of characterizing nanocellulosic materials in situ before drying. The fibril size in air was confirmed by cryogenic transmission electron microscopy (cryo-TEM), and it was found to be 2.6-3.0 nm. Smooth ultrathin films of cationic NFC were prepared by spincoating on silica substrates. The effect of electrolyte concentration and pH on swelling of the cationic NFC film was studied using a quartz crystal microbalance with dissipation. The results showed that at pH = 8 the cat NFC film was insensitive to electrolyte changes while at pH = 4.5, the water content of the film decreased with increasing ionic strength. The electrophoretic mobility measurements showed a cationic zeta potential for the cat NFC that decreased at increasing pH, verifying the swelling behaviour.

Native cellulose nanofibers are functionalized using luminescent metal nanoclusters to form a novel type of functional nanocellulose/nanocluster composite. Previously, various types of cellulose fibers have been functionalized with large, non-luminescent metal nanoparticles. Here, mechanically strong native cellulose nanofibers, also called nanofibrillatedcellulose (NFC), microfibrillatedcellulose (MFC) ornanocellulose, disintegrated from macroscopic cellulose pulp fibers are used as support for small and fluorescent silver nanoclusters. The functionalization occurs in a supramolecular manner, mediated by poly(methacrylic acid) that protects nanoclusters while it allows hydrogen bonding with cellulose, leading to composites with fluorescence and antibacterial activity.

No abstract