Tin perovskite is rising as a promising candidate to address the toxicity and theoretical efficiency limitation of lead perovskite. However, the voltage and efficiency of tin perovskite solar cells are much lower than lead counterparts. Herein, indene-C 60 bisadduct with higher energy level is utilized as an electron transporting material for tin perovskite solar cells. It suppresses carrier concentration increase caused by remote doping, which significantly reduces interface carriers recombination. Moreover, indene-C 60 bisadduct increases the maximum attainable photovoltage of the device. As a result, the use of indene-C 60 bisadduct brings unprecedentedly high voltage of 0.94 V, which is over 50% higher than that of 0.6 V for device based on [6,6]-phenyl-C61-butyric acid methyl ester. The device shows a record power conversion efficiency of 12.4% reproduced in an accredited independent photovoltaic testing lab.

Neuromorphic computing (NC) is a new generation of artificial intelligence. Memristors are promising candidates for NC owing to the feasibility of their ultrahigh‐density 3D integration and their ultralow energy consumption. Compared to traditional electrical memristors, the emerging optoelectronic memristors are more attractive owing to their ability to combine the advantages of both photonics and electronics. However, the inability to reversibly tune the memconductance with light has severely restricted the development of optoelectronic NC. Here, an all‐optically controlled (AOC) analog memristor is realized, with memconductance that is reversibly tunable over a continuous range by varying only the wavelength of the controlling light. The device is based on the relatively mature semiconductor material InGaZnO and a memconductance tuning mechanism of light‐induced electron trapping and detrapping. It is found that the light‐induced multiple memconductance states are nonvolatile. Furthermore, spike‐timing‐dependent plasticity learning can be mimicked in this AOC memristor, indicating its potential applications in AOC spiking neural networks for highly efficient optoelectronic NC.

Surface plasmon-enhanced electroluminescence (EL) in an organic light-emitting diode is demonstrated by incorporating the synthesized Au nanoparticles (NPs) in the hole injection layer of poly(3,4-ethylene dioxythiophene):polystyrene sulfonic acid. An increase of ∼25% in the EL intensity and efficiency are achieved for devices with Au NPs, whereas the spectral and electrical properties remain almost identical to the control device. Time-resolved photoluminescence spectroscopy reveals that the EL enhancement is ascribed to the increase in spontaneous emission rate due to the plasmonic near-field effect induced by Au NPs.

Enhancement of the light emission of ZnO films was observed by coupling through localized surface plasmons. By sputtering Ag islands onto ZnO films, their band gap emission coming through the Ag island films was enhanced by threefolds, while the defect emission was quenched. The enhancement was found to be mainly dependent on the sputtering time of the Ag islands, which is related to the island size. Furthermore, the relative spectral position between the ZnO emission band and the localized surface plasmon resonance bands of Ag islands was found to be decisive for the enhancement or quenching of photoluminescence, indicating that the emission intensity of ZnO films can be controlled by the Ag island size and the localized surface plasmon resonance band position.