Desmoid tumors are rare soft tissue lesions with local invasiveness, primarily affecting young patients. The incidence is approximately five patients per million people per year. 1 Desmoid tumors can be roughly classified into two subtypes: sporadic desmoid tumors and hereditary desmoid tumors. Typically, hereditary desmoid tumors are accompanied by familial adenomatous polyposis or Gardner syndrome. 2 Although several effective treatments for recurrent desmoid tumors have been reported, the optimal regimen remains controversial. 3 Close observation may be the first choice of treatment for asymptomatic patients. However, treatment may be pursued in patients with progressive disease, symptoms, and the risk of adjacent structure involvement. Given that the proximity of adjacent vital structures may preclude appropriate surgery for some recurrent desmoid tumors, wide resection with sufficient negative margins might be markedly difficult to

We propose a sub-wavelength range-based dual-band tunable ideal terahertz metamaterial perfect absorber. The absorber structure consists of three main layers, with the absorber layer consisting of a metal I-shaped structure. By simulating the incident wave absorbance of the structure, we found that the structure has more than 99% absorption peaks in both bands. In addition, we have investigated the relationship between structural absorbance and the structural geometrical parameters. We have studied the relationship between the thickness of the metal absorber layer hb and the absorbance of the metamaterial structure in the 4–14 THz band. Secondly, we have studied the relationship between the thickness of the SiO2 dielectric layer and structural absorbance. Afterwards, we have studied the relationship between the incident angle of the incident electromagnetic wave and structural absorbance. Finally, we have studied the relationship between the length of the metal structure and structural absorbance. The structure can be effectively used for detectors, thermal emitters, terahertz imaging and detection.

No abstract

High-intensity focused ultrasound (HIFU) ablation has been widely used in advanced pancreatic cancer in recent years. In numerous studies, HIFU has been shown to be safe, effective, and practicable, but there are a few HIFU-related adverse effects. The patients’ discomfort during therapy increased proportionally with increasing delivered energy and pain levels seemed to be independent of the dose of anesthetic or sedation. If the power used in therapy is too high, the temperature of the target area will rise rapidly, and the boiling and cavitation make the shape of the necrosis area difficult to control. In recent years, moderate-intensity focused ultrasound (MIFU) has also been shown to heat the tumor locally for palliative treatment. Choosing the appropriate power and effectively controlling the tissue temperature until reaching the threshold for thermal necrosis are of great significance for ensuring the safety of palliative treatment. In this study, an infrared temperature measurement experimental system was set up to measure the temperature rise at different power in an ex vivo bovine liver. It was found that when the acoustic intensity of the focused ultrasound was lower than the cavitation threshold (within the range of the MIFU), the temperature of the tissue kept rising at a steady rate and could still reach the thermal damage threshold temperature within tens of seconds. The results showed that the temperature induced by the MIFU was almost entirely dependent on the thermal effect, and the temperature of the tissue at the end of sonication was linearly related to the power. Finally, this study considered the effect of blood perfusion on the temperature for the application of focused ultrasound in the palliative treatment of advanced pancreatic cancer with the goal of providing a reference for the application of focused ultrasound in the palliative treatment of advanced pancreatic cancer.

Induced polarization (IP) effects in transient electromagnetic (TEM) measurement play a significant role in the detection of minerals, such as sulfide ore, clay ore, etc. However, due to the complex impacts caused by the polarization parameters, the structure of the earth, and the measurement system configuration, the IP effects cannot be easily measured and interpreted. We paid more attention to the vertical component of the ungrounded-TEM system in previous work; however, we will now attempt to utilize the horizontal component to enhance the precision of the measurement and interpretation. We quantitatively discussed the behavior of the horizontal and vertical magnetic fields of the towed-TEM (tTEM) system. We simultaneously introduced the vertical and horizontal components into the Jacobian matrix of the 1D laterally constrained inversion to build the joint inversion. Compared to the vertical component, the horizontal component always shows earlier and bigger sign reversals and contains more IP information. Inversion with the single horizontal or single vertical component showed poor accuracy in the deep and shallow layers, respectively. The joint inversion with both components could correct the errors. Including the horizontal component in the detection and interpretation facilitates an improved resolution for polarizable minerals.