No abstract

• Besides its inherent resistance against degrading organisms, the durability of timber is infl uenced by design details and climatic conditions, making it diffi cult to treat wood durability as an absolute value. Durability classifi cation is, therefore, based on comparing performance indicators between the timber in question and

Timber structures in marine applications are often exposed to severe degradation conditions caused by mechanical loads and wood-degrading organisms. This paper presents the use of timber in marine environments in Europe from a wood protection perspective. It discusses the use of wood in coastline protection and archeological marine wood, reviews the marine borer taxa in European waters, and gives an overview of potential solutions for protection of timber in marine environments. Information was compiled from the most relevant literature sources with an emphasis on new wood protection methods; the need for research and potential solutions are discussed. Traditionally, timber has been extensively utilized in a variety of marine applications. Although there is a strong need for developing new protection systems for timber in marine applications, the research in this field has been scarce for many years. New attempts to protect timber used in marine environments in Europe have mainly focused on wood modification and the use of mechanical barriers to prevent colonization of marine wood borers. The importance of understanding the mechanisms of settlement, migration, boring, and digestion of the degrading organisms is key for developing effective systems for protecting timber in marine environments.

Crack formation is a serious defect that may reduce the lifetime of un®nished wood in service. An accelerated weathering test was carried out to study crack formation of solid wood board specimens of aspen (Populus tremula L.) and Norway spruce (Picea abies (L.) Karst.). The in¯uence of the boards' distance from the pith was also studied. The aspen specimens developed a higher number of cracks than the spruce specimens. However, these cracks were shorter and less injurious than those propagating in spruce wood. It is concluded that a solid wood siding of aspen will show at least as good a performance as spruce regarding crack injuries. For both aspen and spruce, boards taken from near the pith had a lower proportion of long cracks than boards taken further out. This supports the rule that boards with a high proportion of annual rings perpendicular to the surface (the boards near to the pith) have a higher resistance to crack formation than boards with a high proportion of horizontal annual rings.

No abstract