Many of the statistical properties of both the velocity and the vorticity fields of a nominally zero-pressure-gradient turbulent boundary layer at Rδ = 27650 (Rθ = 2685) have been simultaneously measured. The measurements were made with a small nine-sensor hot-wire probe which can resolve the turbulence to within about six Kolmogorov microscales just above the sublayer. The statistical properties of the velocity vector field compare very well with other laboratory measurements and with direct numerical simulations when Reynolds-number dependence is taken into account. The statistical properties of the vorticity field are also in generally good agreement with the few other measurements and with the direct numerical simulations available for comparison. Near the wall, r.m.s. measurements show that the fluctuating spanwise vorticity is the dominant component, but in the outer part of the boundary layer all the component r.m.s. values are nearly equal. R.m.s. measurements of the nine individual velocity gradients show that the gradients normal to the wall of all three velocity components are the largest, with peaks occurring near the wall as expected. Gradients in the streamwise direction are everywhere small. One-dimensional spectra of the vorticity components show the expected shift of the maximum energy to higher wavenumbers compared to spectra of the velocity components at the same location in the flow. The budget of the transport equation for total enstrophy indicates that the viscous dissipation rate is primarily balanced by the viscous diffusion rate in the buffer layer and by the rotation and stretching rate in the logarithmic layer.
A nine-sensor hot-wire probe is described which is capable of simultaneously measuring the velocity and vorticity vectors with a spatial resolution of about six Kolmogorov microscales just above the viscous sublayer in a thick turbulent boundary layer at a Reynolds number of Rθ = 2685. Results from tests of the probe performance are presented to show that the three velocity components at each of its three arrays are measured with sufficient accuracy to allow determination of velocity gradients and from them the vorticity vector. Measurements with this probe of statistical properties of the velocity and vorticity fields of the turbulent boundary layer are given in Part 2 of this paper. When compared to the results of others, they further demonstrate the capability of this probe to measure simultaneously the velocity and vorticity vectors in turbulent flows of low to moderate Reynolds numbers.
This article reviews the principal experimental methods currently available to simultaneously measure all the terms of the velocity gradient tensor of turbulent flows. These methods have been available only for a little more than 20 years. They have provided access to the most fundamental and defining properties of turbulence. The methods include small, multisensor, hot-wire probes that provide single-location, time-resolved measurements of the tensor and various optical arrangements, most of which provide the tensor information over a larger spatial extent but, in most cases, without resolution in time. Data-reduction algorithms, spatial-resolution issues, and the use of Taylor's hypothesis are addressed in evaluating the accuracy of the various methods.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.