No abstract

The demand for high power density, therefore high heat dissipation, silicon carbide power electronics modules is propelled by applications such as hybrid transportation and renewable power generation and conversion, among others. Besides a low thermal resistance, these applications require high thermal capacitance to manage transient operations. The Package Integrated Cyclone COoler (PICCO) is an additively manufactured, thermal energy storing cooler codesigned by GE Research (GRC) in collaboration with the US Army Research Lab (ARL). The key aspect of PICCO is its capability to swirl a two-phase coolant, i.e. liquid-gas. The centrifugal field creates a radial pressure gradient inducing buoyancy. The strong radial acceleration to which the fluid is subject forces relatively cold flow outward to reach the hot wall, thus boosting the heat transfer, while hot flow and bubbles migrate inward and the two-phase system is nearly isothermal (thermal storage). In this paper, we introduce a novel power module package which brings together silicon carbide devices, Power OverLay (POL) wirebondless interconnect, and two-phase swirling flow in an additively manufactured cooler. Various embodiments of this power module structure are presented along with a discussion on their thermal behavior when subjected to a hybrid vehicle drive cycle.

The demand for high power density, therefore high heat dissipation, power electronics modules is propelled by applications such as hybrid transportation and asynchronous power generation, among others. Besides a low thermal resistance, these applications require high thermal capacitance to manage transient operations. The Package Integrated Cyclone COoler (PICCO) is an additively manufactured, thermal energy storing cooler codesigned by GE Research (GRC) in collaboration with the US Army Research Lab (ARL). The key aspect of PICCO is its capability to swirl a two-phase coolant, i.e. liquid-gas. The centrifugal field creates a radial pressure gradient inducing buoyancy. The strong radial acceleration to which the fluid is subject forces relatively cold flow outward to reach the hot wall, thus boosting the heat transfer, while hot flow and bubbles migrate inward and the two-phase system is nearly isothermal (thermal storage). The proposed study models the swirled flow in terms of liquid film heat conductance and critical heat flux predictions. The resulting heat transfer coefficient can be applied to the walls of the cyclone and used as a boundary condition for the heat conduction problem through the cyclone wall and the module layers.

The increasing demand for high power density wide-bandgap power electronics has propelled heat transfer research leading to a constant increase in the thermal performance of cold plates and heat sinks. Most of this research has focused on reducing thermal resistance of the package which can have a detrimental effect on transient thermal performance if thermal capacitance is reduced. In order to provide both a low thermal resistance and a higher thermal capacitance integrated into the package and near the thermal junction, a new cold plate called the Package Integrated Cyclone COoler (PICCO) was developed. GE Research and the US Army Research Lab collaborated to explore and validate the potential of this concept. The PICCO coldplate, which is enabled by 3D printing, establishes a swirling coolant flow field to remove heat. The swirling flow is anticipated to significantly aid in vapor removal from the surface and hence allow for the fluid to provide thermal capacitance through two-phase heat transfer efficiently. This paper describes the experiment design and development for thermal storage and cooling performance characterization of PICCO. The test rig includes a high-pressure capability gear pump moving fluid first through a Coriolis flowmeter and then through PICCO, where the fluid is accelerated in the cyclone and heated by miniaturized ceramic heaters, simulating SiC power electronics. The coolant releases the accumulated enthalpy to a plate-fin heat exchanger that is connected to a chiller. Several absolute and differential pressure transducers and thermocouples monitor the state of FC-72. The experiments will provide empirical transfer functions characterizing the PICCO pressure drop, heat transfer coefficient, critical heat flux and thermal energy storage capability.