Numerical simulation is an important tool which can be used for designing parts and production processes. Springback prediction, with the use of numerical simulation, is essential for the reduction of tool try-outs through the design of the forming tools with die compensation, therefore, increasing the dimensional accuracy of stamped parts and reducing manufacturing costs. In this work, numerical simulation was used for performing the springback analysis of car body stamping made of aluminium alloy AA6451-T4. The finite element analysis (FEM) based software PAM-STAMP 2G was used for performing the forming and springback simulations. These predictions were conducted with various combinations of material models to achieve accurate springback prediction results. Six types of yield functions (Barlat89, Barlat2000, Vegter-Lite, Hill90, Hill48 isotropic, and Hill48 orthotropic) were used in combination with the Voce hardening model. Springback analysis was conducted in three sections of the formed part; the numerical results were compared with the experimental values. It was found that the combinations of Barlat's yield functions and the Voce hardening law were most accurate in terms of springback prediction. Additionally, it was found that the phenomena that were investigated, which are required for the determination of the kinematic hardening model, such as the change of Young's modulus E, the transient behaviour, work-hardening stagnation, and permanent softening, were not observed in the aluminium alloy studied.

In this work, the influence of material models used in the FEM simulation on the springback prediction is investigated. The interest of this paper is to extend the knowledge base regarding springback predictions in numerical simulation. The springback effect of a V-shaped sheet metal part made of TRIP steel, with a thickness of 0.75 mm was investigated. The bending angle was set to 90°.  In the numerical simulation, Hill48 and Barlat yield criteria were used in combination with Ludwik's and Swift's hardening models. Achieved data from the numerical simulations were compared and evaluated with experimental test results. The experimental results showed the relation between springback and calibration force. The effect of specimen cut direction on the springback was smaller in comparison with the calibration force. The numerical results of the springback were not identical with the experimentally achieved springback values in most cases. Particularly, when a calibration force of 1 800 N was used in the simulation. The simulation results showed a good correlation between experimental and numerical results, when Hill48 and Barlat yield criteria were used in combination with Ludwik hardening law and calibration force F with the value 900 N was applied.

The springback in the sheet metal forming process refers to the change of shape after the load removal. It is usually undesirable, causing problems in the subsequent forming operations, in the assembly and negatively affects the quality of the final product. Numerical prediction of the springback with the use of the numerical simulation is crucial for the reduction of forming tool try-outs, reducing manufacturing costs and increasing the accuracy of the stamped part. In this work, numerical simulation was used for the springback prediction of the hat-shaped part made of advanced high-strength dual-phase steel HCT600X+Z. These numerical predictions were performed with the use of various combinations of material models to try to improve the prediction results. Furthermore, this work includes the proposed springback reduction measure. The reduction of the springback was achieved by the tool design which includes a counterpunch. The springback analysis was carried out in the side view of the formed part; the springback prediction results were compared with the experimental values.

The production of moulded surfaces in the engineering industry is progressing. One way to produce these surfaces is using CAM systems. As well as the use of a CAM system, the correct choice of milling strategy is also important. The aim of this paper was to increase the knowledge of the fi nishing milling strategies eff ect on surface quality in the production of shaped surfaces. For the experiment, a sample containing convex and concave curves produced on a 3-axis milling machine was designed. The material used for experiment was aluminum alloy and fi ve diff erent strategies were compared. The results of experiment included some methods for the comparison of machined surface quality. At the beginning visual comparison of the machined surface in CAM system with the real machined surface was evaluated. Other methods of the surface quality evaluation were roughness measurement and surface texture analysis. At the end the production time with respect to the selected strategies were evaluated and compared. The experiments showed that the best roughness values the strategy Constant Z was obtained and the shortest production time was achieved by the strategy linear and liner 90.

This article examines the mechanical properties and compatibility of selected composite materials produced with RP technology and the FFF—fused filament fabrication process. The article scales sophisticated modern materials based on PLA—polylactic acid—plastic and its composite variants. The research is carried out on the 3D FFF printer Felix 3.1 with a dual extruder, which works on the “open-source” principle. In this research, elements of the paradigm and methodology of the processing technology for RP were applied; they were implemented according to EN ISO 527 and ISO 2602 standards. The aim of this study was to investigate the impact of 3D-printing strategy on the mechanical properties of 5 types of PLA composites. The results of this research solve the material compatibility problem, primarily through experimental testing of different combinations of filaments in different printing directions. Analysis of the experimental data showed correlations between the choice of printing strategy and mechanical properties, mainly tensile strength of the selected filaments. The research results show the influence of the printing orientation on mechanical properties of 3D printed samples: parts extruded in length orientation showed higher values of tensile strength compared to parts made in width and height. The CarbonPLA material exhibited 10 times higher tensile strength when printed in length compared to samples.