This paper focuses on the dimensioning of a very bright full color 10 μm‐pitch light‐emitting device (LED) microdisplay for avionics application. Starting from the specifications of head‐mounted display to be used in an augmented reality optical system, a theoretical approach is proposed that enables predicting the specifications of the main technology building blocks entering into the microdisplay manufacturing process flow. By taking into account various material and technological parameters, kept as realistic as possible, it is possible to assess the feasibility of a very bright LED microdisplay (1 Mcd/m2 full white) and to point out the main limitations. The theoretical specifications are then compared with the technical results obtained so far in the framework of the H2020 Clean Sky “HILICO” project. It shows that 350 000 cd/m2 of white emission may be accessible with the present gallium nitride (GaN)‐micro‐LED technology provided a color conversion solution with stable external quantum efficiency of 30% is available. Beyond such level of luminance, the inherent limitations of driving circuit (4 V, 15 μA per pixel) commands working with materials enabling higher external quantum efficiency (EQE). In particular, 10‐μm‐pitch micro‐LEDs with electroluminescence EQE of 15% and color conversion EQE approaching 60% are needed, opening the way to future challenging material and technology research developments.

When two or more touches are detected on a self-capacitive touch-screen, positional ambiguities known as "ghost" touches are created. A novel method of distinguishing between real and "ghost" touches is described. Experimental results for dual-touch give an SNR of over 55 dB, appropriate for secured touch detection in severe environments such as avionics.

No abstract

No abstract

A 3D stereoscopic head‐up display using a tunable bandpass filter to perform left and right image spectral separation is presented. Using a single filter reduces the size and the cost of the head‐up display optical engine and enables each spectral band to be accurately tuned. Experiments performed on the first prototype demonstrate the ability to continuously tune the bandpass frequency on 30‐nm range while keeping a 20‐nm bandwidth. Such a system avoids the use of a bulky and costly rotating wheel and enables the use of holographic optical elements known to be wavelength selective.