No abstract

No abstract

No abstract

Ti6Al4V alloy, produced by investment casting using yttria stabilized zirconia, was machined and then mill-annealed in vacuum furnace. The ultimate strength, yield strength and percentage elongation were largely improved compared to the same alloy in the as cast condition. The mill annealing temperature and time strongly affected the ultimate strength, 0.2% yield strength and the percentage elongation.

Alloy A356 is one of the most popular alloys used for semisolid metal forming. The heat treatment cycles that are currently applied to semisolid processed components are mostly those that are in use for dendritic casting alloys. The assumption has been made that these heat treatments are not necessarily the optimum treatments, as the difference in solidification history and microstructure of SSM processed components should be considered. The objective of this study is to determine whether dendritic A356 behaves in a similar way to globular A356 in terms of its response to artificial aging with or without prior natural aging. The results indicate that the differences in microstructures (globular or dendritic) do not have a noteworthy effect on the heat treatment response. It is also shown that strong linear correlations are found between T4 and T6 hardness and wt% Mg of A356, regardless of the casting technique used.