The load-carrying capacities of welded joints need to be paid attention to in the design of the frame, which transfers the thrust generated by the rocket engine to the rocket body. A load-carrying capacity evaluation method of welded joints based on the structural stress method is proposed in this study. Both the ultimate load-carrying capacity and fracture section angle are precisely obtained by the evaluation method. At the same time, a definition of weld-failure stress is given based on the evaluation method and tests. The load-carrying capacity of welded joints in the rocket engine frame is analyzed through the finite element model, including the overall structure and local weld details. The weld-failure stress of welded joints is obtained based on the analysis of three types of welded structures—standard shear specimen, U-shaped fillet welded specimen and pipe-plate fillet welded specimen. The safety factors of the transverse rod and longitudinal bearing rod welded joints of the frame are 8.6 and 13.4, respectively.

PurposeRegeneratively cooled thrust chamber is a key component of reusable liquid rocket engines. Subjected to cyclic thermal-mechanical loadings, its failure can seriously affect the service life of engines. QCr0.8 copper alloy is widely used in thrust chamber walls due to its excellent thermal conductivity, and its mechanical and fatigue properties are essential for the evaluation of thrust chamber life. This paper contributes to the understanding of the damage mechanism and material selection of regeneratively cooled thrust chambers for reusable liquid rocket engines.Design/methodology/approachIn this paper, tensile and low-cycle fatigue (LCF) tests were conducted for QCr0.8 alloy, and a Chaboche combined hardening model was established to describe the elastic-plastic behavior of QCr0.8 at different temperatures and strain levels. In addition, an LCF life prediction model was established based on the Manson–Coffin formula. The reliability and accuracy of models were then verified by simulations in ABAQUS. Finally, the service life was evaluated for a regenerative cooling thrust chamber, under the condition of cyclic startup and shutdown.FindingsIn this paper, a Chaboche combined hardening model was established to describe the elastoplastic behavior of QCr0.8 alloy at different temperatures and strain levels through LCF experiments. The parameters of the fitted Chaboche model were simulated in ABAQUS, and the simulation results were compared with the experimental results. The results show that the model has high reliability and accuracy in characterizing the viscoplastic behavior of QCr0.8 alloy.Originality/value(1)The parameters of a Chaboche combined hardening constitutive model and LCF life equation were optimized by tensile and strain-controlled fatigue tests of QCr0.8 copper alloy. (2) Based on the Manson–Coffin formula, the reliability and accuracy of constitutive model were then verified by simulations in ABAQUS. (3)Thermal-mechanical analysis was carried out for regeneratively cooled thrust chamber wall of a reusable liquid rocket engine, and the service life considering LCF, creep and ratcheting damage was analyzed.