Sonodynamic therapy (SDT), which induces activation of sonosensitizers in cancer cells through ultrasound irradiation, has emerged as an alternative and promising noninvasive therapeutic approach to kill both superficial and deep parts of tumors. In this study, mesoporous silica (MSN) grown on reduced graphene oxide nanosheet (nrGO) capped with Rose Bengal (RB)-PEG-conjugated iron-oxide nanoparticles (IONs), nrGO@MSN-ION-PEG-RB, was strategically designed to have targeted functionality and therapeutic efficacy under magnetic guiding and focused ultrasound (FUS) irradiation, respectively. The singlet oxygen produced by ultrasound-activated RB and the ultrasound-induced heating effect was enhanced by rGO and IONs, which improved the cytotoxic effect in cancer cells. In an animal experiment, we demonstrated that the combination of sonodynamic/hyperthermia therapy with magnetic guidance using this nanocomposite therapeutic agent can produce remarkable efficacious therapy in tumor growth inhibition. Furthermore, the combination effect induced by FUS irradiation produces significant damage to both superficial and deep parts of the targeted tumor.

A high-sensitivity and low-power theranostic nanosystem that combines with synergistic photothermal therapy and surface-enhanced Raman scattering (SERS) mapping is constructed by mesoporous silica self-assembly on the reduced graphene oxide (rGO) nanosheets with nanogap-aligned gold nanoparticles (AuNPs) encapsulated and arranged inside the nanochannels of the mesoporous silica layer. Rhodamine 6G (R6G) as a Raman reporter is then encapsulated into the nanochannels and anti-epidermal growth factor receptor (EGFR) is conjugated on the nanocomposite surface, defined as anti-EGFR-PEG-rGO@CPSS-Au-R6G, where PEG is polyethylene glycol and CPSS is carbon porous silica nanosheets. SERS spectra results show that rGO@CPSS-Au-R6G enhances 5 × 10(6) magnification of the Raman signals and thus can be applied in the noninvasive cell tracking. Furthermore, it displays high sensitivity (detection limits: 10(-8) m R6G solution) due to the "hot spots" effects by the arrangements of AuNPs in the nanochannels of mesoporous silica. The highly selective targeting of overexpressing EGFR lung cancer cells (A549) is observed in the anti-EGFR-PEG-rGO@CPSS-Au-R6G, in contrast to normal cells (MRC-5). High photothermal therapy efficiency with a low power density (0.5 W cm(-2) ) of near-infrared laser can be achieved because of the synergistic effect by conjugated AuNPs and rGO nanosheets. These results demonstrate that the anti-EGFR-PEG-rGO@CPSS-Au-R6G is an excellent new theranostic nanosystem with cell targeting, cell tracking, and photothermal therapy capabilities.

We present the design and synthesis of Ca-rich Ca-Al-O oxides, with Ca(2+)/Al(3+) ratios of 1:1, 3:1, 5:1, and 7:1, which were prepared by hydrothermal decomposition of coprecipitated hydrotalcite-like Ca-Al-CO(3) precursors, for high-temperature CO(2) adsorption at 500-700 °C. In situ X-ray diffraction measurements indicate that the coprecipitated, Ca-rich, hydrotalcite-like powders with Ca(2+)/Al(3+) ratios of 5:1 and 7:1 contained Ca(OH)(2) and layered double hydroxide (LDH) phases. Upon annealing, LDH was first destroyed at approximately 200 °C to form an amorphous matrix, and then at 450-550 °C, the Ca(OH)(2) phase was converted into a CaO matrix with incorporated Al(3+) to form a homogeneous solid solution without a disrupted lattice structure. CaO nanocrystals were grown by thermal treatment of the weakly crystalline Ca-Al-O oxide matrix. Thermogravimetric analysis indicates that a CO(2) adsorption capacity of approximately 51 wt. % can be obtained from Ca-rich Ca-Al-O oxides prepared by calcination of 7:1 Ca-Al-CO(3) LDH phases at 600-700 °C. Furthermore, a relatively high CO(2) capture capability can be achieved, even with gas flows containing very low CO(2) concentrations (CO(2)/N(2) = 10 %). Approximately 95.6 % of the initial CO(2) adsorption capacity of the adsorbent is retained after 30 cycles of carbonation-calcination. TEM analysis indicates that carbonation-promoted CaCO(3) formation in the Ca-Al-O oxide matrix at 600 °C, but a subsequent desorption in N(2) at 700 °C, caused the formation CaO nanocrystals of approximately 10 nm. The CaO nanocrystals are widely distributed in the weakly crystalline Ca-Al-O oxide matrix and are present during the carbonation-calcination cycles. This demonstrates that Ca-Al-O sorbents that developed through the synthesis and calcination of Ca-rich Ca-Al LDH phases are suitable for long-term cyclic operation in severe temperature environments.

A novel CO(2) solid sorbent was prepared by synthesizing and modifying AlOOH-supported CaAl layered double hydroxides (CaAl LDHs), which were prepared by using mesoporous alumina (γ-Al(2)O(3)) and calcium chloride (CaCl(2)) in a hydrothermal urea reaction. The nanostructured CaAl LDHs with nanosized platelets (3-30 nm) formed and dispersed inside the crystalline framework of mesoporous AlOOH (boehmite). By calcination of AlOOH-supported LDHs at 700 °C, the mesoporous CaAl metal oxides exhibited ordered hexagonal mesoporous arrays or uniform nanotubes with a large surface area of 273 m(2) g(-1) , a narrow pore size distribution of 6.2 nm, and highly crystalline frameworks. The crystal structure of the calcined mesoporous CaAl metal oxides was multiphasic, consisting of CaO/Ca(OH)(2), Al(2)O(3), and CaAlO mixed oxides. The mesoporous metal oxides were used as a solid sorbent for CO(2) adsorption at high temperatures and displayed a maximum CO(2) capture capacity (≈45 wt %) of the sorbent at 650 °C. Furthermore, it was demonstrated that the mesoporous CaAl oxides showed a more rapid adsorption rate (for 1-2 min) and longer cycle life (weight change retention: 80 % for 30 cycles) of the sorbent because of the greater surface area and increased number of activated sites in the mesostructures. A simple model for the formation mechanism of mesoporous metal oxides is tentatively proposed to account for the synergetic effect of CaAl LDHs on the adsorption of CO(2) at high temperature.

A highly stable high-temperature CO₂ sorbent consisting of scaffold-like Ca-rich oxides (Ca-Al-O) with rapid absorption kinetics and a high capacity is described. The Ca-rich oxides were prepared by annealing Ca-Al-NO₃ layered double hydroxide (LDH) precursors through a sol-gel process with Al(O(i)P)₃ and Ca(NO₃)₂ with Ca(2+)/Al(3+) ratios of 1:1, 2:1, 4:1, and 7:1. XRD indicated that only LDH powders were formed for Ca(2+)/Al(3+) ratios of 2:1. However, both LDH and Ca(OH)₂ phases were produced at higher ratios. Both TEM and SEM observations indicated that the Ca-Al-NO₃ LDHs displayed a scaffold-like porous structure morphology rather than platelet-like particles. Upon annealing at 600 °C, a highly stable porous network structure of the CaO-based Ca-Al-O mixed oxide (CAMO), composed of CaO and Ca₁₂Al₁₄O₃₃, was still present. The CAMO exhibited high specific surface areas (up to 191 m(2)g(-1)) and a pore size distribution of 3-6 nm, which allowed rapid diffusion of CO₂ into the interior of the material, inducing fast carbonation/calcination and enhancing the sintering-resistant nature over multiple carbonation/calcination cycles for CO₂ absorption at 700 °C. Thermogravimetric analysis results indicated that a CO₂ capture capacity of approximately 49 wt% could be obtained with rapid absorption from the porous 7:1 CAMO sorbents by carbonation at 700 °C for 5 min. Also, 94-98% of the initial CO₂ capture capability was retained after 50 cycles of multiple carbonation/calcination tests. Therefore, the CAMO framework is a good isolator for preventing the aggregation of CaO particles, and it is suitable for long-term cyclic operation in high-temperature environments.