Mechanical flexibility and electrical reliability establish the fundamental criteria for wearable and implantable electronic devices. In order to receive intrinsically stretchable resistive switching memories, both the electrode and storage media should be flexible yet retain stable electrical properties. Experimental results and finite element analysis reveal that the formation of 3D liquid metal galinstan (GaInSn) calabash bunch conductive network in poly(dimethyl siloxane) (PDMS) matrix allows GaInSn@PDMS composite as soft electrode with the stable conductivity of >1.3 × 103 S cm−1 at the stretching strains of >80% and a fracture strain extreme of 108.14%, while the third‐generation metal–organic framework MIL‐53 thin film with a facial rhombohedral topology enables large mechanical deformation up to a theoretical level of 17.7%. Combining the use of liquid metal–based electrode and MIL‐53 switching layer, for the first time, intrinsically stretchable RRAM device Ag/MIL‐53/GaInSn@PDMS is demonstrated that can exhibit reliable resistive switching characteristics at the strain level of 10%. The formation of fluidic gallium conductive filaments, together with the structural flexibility of the GaInSn@PDMS soft electrode and MIL‐53 insulating layer, accounts for the uniform resistive switching under stretching deformation scenario.

In the present study, a facile one-pot synthetic route, utilizing a strong polar organic solvent, N-methyl 2-pyrrolidone (NMP), is demonstrated to obtain highly monodispersed ferrite nanocrystals. The equimolar mixture of oleic acid, C(17)H(33)COOH (R-COOH), and oleylamine, C(18)H(35)NH(2) (R'-NH(2)), was used to coat the magnetic nanocrystals. Structural and magnetic properties of the ferrite nanocrystals were studied by a multitechnique approach including X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometry (VSM), and Mössbauer spectroscopy. FTIR spectral analysis indicates oleylamine helps in deprotonation of oleic acid, resulting in the formation of an acid-base complex, R-COO¯:NH(3)(+)-R', which acts as binary capping agent. Structural and coordination differences of iron were studied by XPS and Mössbauer spectral analysis. XPS analysis was carried out to examine the oxidation state of iron ions in iron oxide nanocrystals. The presence of a magnetically dead layer (∼0.38 and ∼0.67 nm) and a nonmagnetic organic coating (∼2.3 and ∼1.7 nm) may substantially reduce the saturation magnetization values for CoFe(2)O(4) and Fe(3)O(4) nanocrystals, respectively. The energy barrier distribution function of magnetic anisotropy was derived from the temperature dependent decay of magnetization. A very narrow energy barrier distribution elucidates that the ferrite nanocrystals obtained in this study are highly monodispersed.

As an indispensable basic component of wearable devices, the composite elastic conductor is widely used for elastic electrode and elastic wire. The ideal elastic conductor is expected to have high conductivity and stretchability, and maintain the resistance constant during stretching. However, it's difficult for the current composite elastic conductors filling solid conductive materials. Here, a composite elastic conductor filling liquid‐metal alloy is reported. Highly conductive and freely deformable liquid‐metal filler achieves the elastic conductor with excellent conductivity and stretchability (electrical conductivity of 1.34 × 103 S cm−1, sheet resistance of 17.59 mΩ □−1, and breaking elongation of 116.86%). Importantly, the filler forms novel three‐dimensional Calabash Bunch conductive network structure in elastic matrix, which enables the elastic conductor to have excellent dynamic stability during stretching. The relative resistance variation is only 4.305% at 116.86% strain. This variation is 2–5 orders of magnitude smaller than that of the reported composite elastic conductor at the same strain, which is important for wearable devices to remain performances fairly unchanged undergo large deformation. Finally, it served as elastic electrodes of a stretchable capacitive strain sensor and elastic wires of a stretchable earphone respectively to demonstrate its potential in wearable devices.