Visible light communications (VLC) have attracted considerable interest in recent years due to an increasing need for data communication links in home and enterprise environments. Organic light-emitting diodes (OLEDs) are widely used in display applications owing to their high brightness, high quality colour-rending capability and low cost. As a result, they are attractive candidates for the implementation of ultra-low cost visible light optical links in free-space and guided-wave communications. However, OLEDs need to exhibit a bandwidth of at least ~MHz to be able to support the modest data rates (~Mbps) required in these applications. Although fluorescent OLEDs typically exhibit shorter photon lifetimes than inorganic LEDs, the bandwidth performance of the large size OLEDs used in display applications are limited by their electrical characteristics. In this work, we present a detailed physical simulation that describes well the performance of fast OLED devices that exhibit significant-3 dB bandwidths (f-3dB) of 44 MHz obtained for a 0.12 mm 2 device. It is demonstrated that the reduction of the device size results in a significant bandwidth improvement due primarily to a reduction in parasitic capacitance of the devices, though this is counteracted by carrier dynamic effects. The model provides an insight into the basic physical properties of the OLED and may be used for optimisation of future generations of OLED devices.

No abstract

Light amplification by stimulated emission of radiation (laser) sources have many advantages for use in high data rate optical wireless communications. In particular, the low cost and high-bandwidth properties of laser sources such as vertical-cavity surface-emitting lasers (VCSELs) make them attractive for future indoor optical wireless communications. In order to be integrated into future indoor networks, such lasers should conform to eye safety regulations determined by the international electrotechnical commission (IEC) standards for laser safety. In this paper, we provide a detailed study of beam propagation to evaluate the received power of various laser sources, based on which as well as the maximum permissible exposure (MPE) defined by the IEC 60825-1:2014 standard, we establish a comprehensive framework for eye safety analyses. This framework allows us to calculate the maximum allowable transmit power, which is crucial in the design of a reliable and safe laser-based wireless communication system. Initially, we consider a single-mode Gaussian beam and calculate the maximum permissible transmit power. Subsequently, we generalize this approach for higher-mode beams. It is shown that the M -squared-based approach for analysis of multimode lasers ensures the IEC eye safety limits, however, in some scenarios, it can be too conservative compared to the precise beam decomposition method.Laser safety analyses with consideration of optical elements such as lens and diffuser, as well as for VCSEL array have been also presented. Skin safety, as another significant factor of laser safety, has also been investigated in this paper. We have studied the impacts of various parameters such as wavelength, exposure duration and the divergence angle of laser sources on the safety analysis by presenting insightful results.

In this paper a 1.2 kV, 50 A trench clustered IGBT is experimentally demonstrated in field-stop technology for the first time. Due to the optimized field stop layer design, the off-state leakage current is lower than 1 mA at 175°C. A low on-state voltage drop of 1.6 V is achieved at 150°C. The saturation current levels are effectively controlled by the selfclamping feature. Moreover, experimental results confirm that the fabricated devices exhibit dynamic avalanche-free switching performance as well as high dV/dt controllability.

No abstract