No abstract

Geometric errors directly affect the tool tip position, reduce machining accuracy, and are one of the most important errors of multi-axis machining tool. However, the geometric errors are intercoupling, and the measured values at different points vary and are stochastic. The identification of the most crucial geometric errors and the determination of a method to control them is a key problem to improve the machining accuracy of machine tool. To achieve this goal, a new analytical method, to identify crucial geometric errors for a multi-axis machine tool is proposed here based on multibody system (MBS) theory and global sensitivity analysis. The volumetric error modeling of multi-axis machine tool has been given by MBS theory, which describes the topological structure of multibody system simply and conveniently in a matrix. The stochastic characteristic of geometric errors is taken into consideration and Sobol global sensitivity analysis method is introduced to identify crucial geometric errors of machine tool. A vertical machining center is selected as an illustration example. The analysis results reveal that the analytical method presented in this paper can identify the crucial geometric errors and are helpful to improve the machining accuracy of multi-axis machine tool.

Although machine tool can meet the specifications while it is new, after a long period of cutting operations, the abrasion of contact surfaces and deformation of structures will degrade the accuracy of machine tool due to the increase of the geometric errors in six freedoms. Therefore, how to maintain its accuracy for quality control of products is of crucial importance to machine tool. In this paper, machining accuracy reliability is defined as the ability to perform its specified machining accuracy under the stated conditions for a given period of time, and a new method to analyze the sensitivity of geometric errors to the machining accuracy reliability is proposed. By applying Multi-body system theory, a comprehensive volumetric model explains how individual geometric errors affect the machining accuracy (the coupling relationship) was established. Based on Monte Carlo mathematic simulation method, the models of the machining accuracy reliability and sensitivity analysis of machine tools were developed. By taking the machining accuracy reliability as a measure of the ability of machine tool and reliability sensitivity as a reference of optimizing the basic parameters of machine tools, an illustrative example of a three-axis machine tool was selected to demonstrate the effectiveness of the proposed method.

No abstract