IND RA RATNA † a nd S. NIMBA LKAR † A series of large-scale cyclic triaxial tests were conducted on latite basalt aggregates (ballast) to investigate how the frequency f affects the permanent deformation and degradation of railway ballast. During testing the frequency was varied from 5 Hz to 60 Hz to simulate a range of train speeds from about 40 km/h to 400 km/h. Three categories of permanent deformation mechanisms were observed in response to the applied cyclic loads, namely, the inception of plastic shakedown ( f < 20 Hz), then plastic shakedown and ratcheting (30 Hz < f < 50 Hz), followed by plastic collapse at higher frequencies ( f > 60 Hz). The permanent strain of ballast and particle breakage increased with the frequency and number of load cycles. A cyclic strain ratio was introduced to capture the effect of frequency on the permanent axial and volumetric strains, respectively. An empirical equation was formulated to represent this relationship for latite basalt, and a critical train speed was identified. A good correlation was obtained between particle breakage and volumetric strain under cyclic loading.

No abstract

Rubber tyres have a three dimensional cylindrical structure, and as such could be used to stabilise foundations by increasing the bearing capacity and reducing settlement for transport infrastructure. It is therefore expected that in railroad engineering, a capping layer reinforced with rubber tyres could help to reduce the thickness of the granular layer (i.e. ballast), improve the track bearing capacity, and reduce the frequency of maintenance. However, there is a notable gap between the conceptual theories and real-life applications pertaining to the mechanisms of rubber tyre-reinforced foundations. In pavement engineering, the bearing capacity is closely linked to plate load tests. In this study, plate load tests were carried out on a single tyre filled with subballast material and subjected to a vertical load. This testing process was then modelled using the Finite Element software ABAQUS to study and quantify the interaction between the tyre and the granular medium. The experimental and numerical results reveal that the rubber tyre can significantly increase the modulus and ultimate bearing capacity of the granular layer. The numerical process was further extended to a finite element track model to demonstrate the expected response of a ballasted railway track with and without tyre reinforcement.

This paper presents the results of a series of large-scale cyclic triaxial tests conducted on ballast subjected to increased load and frequency of loading. For a given loading, the laboratory test data demonstrate that the resilient modulus of ballast is influenced by the frequency of loading. Both strain hardening and strain softening can be observed in response to increasing magnitude of load and frequency. A correlation between the resilient modulus and bulk stress is introduced to describe both the strain hardening and strain softening behaviour of ballast under different frequencies. A good corroboration between the cyclic stress ratio and the accumulated permanent strain and the resilient strain is demonstrated.

Ballasted rail tracks are the most important mode of transportation in terms of traffic tonnage serving the needs of bulk freight and passenger movement, but under train loads, the particles degrade due to breakage and the progressive accumulation of external fines or mud-pumping under the subgrade, all of which reduce its shear strength and increase track instability. These actions adversely affect the safety, passenger comfort and efficiency of tracks, as well as enforcing speed restrictions and more frequent track maintenance. In spite of advances in rail track geotechnology, the optimum choice of ballast for track design is still considered critical because ballast degradation is influenced by the amplitude and number of load cycles, particle gradation, track confining pressure and the angularity and fracture strength of individual grains. One of the most effective methods of enhancing track stability and reducing the stresses transmitted to a soft subgrade layer is to increase the stiffness of the overlying granular media. This paper presents our current knowledge of rail track geomechanics, including important concepts/topics related to laboratory testing and computational modelling approaches used to study the load-deformation behaviour of ballast improved with waste tyres, synthetic geogrids and geocells.Abstract: Transport infrastructure must now perform over the long term because heavy haul transport networks are expected to withstand higher speeds and heavier axle loads. Ballasted rail tracks are the most important mode of transportation in terms of traffic tonnage serving the needs of bulk freight and passenger movement, but under train loads the particles degrade due to breakage and the progressive accumulation of external fines or mud-pumping under the subgrade, all of which reduces its shear strength and increases track instability. These actions adversely affect the safety, passenger comfort and efficiency of tracks, as well as enforcing speed restrictions and more frequent track maintenance. In spite of advances in rail track geotechnology, the optimum choice of ballast for track design is still considered critical because ballast degradation is influenced by the amplitude and number of load cycles, particle gradation, track confining pressure, and the angularity and fracture strength of individual grains. One of the most effective methods of enhancing track stability and reducing the stresses transmitted to a soft subgrade layer is to increase the stiffness of the overlying granular media. The Centre for Geomechanics and Railway Engineering (CGRE) has developed new design and construction concepts for track upgrading by applying theory to practice to enhance track longevity and minimise the maintenance costs. Research conducted at CGRE has shown that understanding the load transfer mechanisms and their effect on ballast breakage are important pre-requisites for decreasing track maintenance costs. This paper presents our current knowledge of rail track geomechanics, including important concepts/t...