A multipoint gas sensing scheme based on photoacoustic spectroscopy was proposed. Multiple photoacoustic spectroscopy (PAS) gas cells (resonant frequency f=5.0  kHz) were connected in series for the multipoint gas sensing with wavelength modulation technique. The PAS signal was excited by modulating the tunable distributed feedback laser diode wavelength at f/2 using a changing driving current. The gas concentration of each gas cell was obtained by the PAS signal, which was demodulated by the lock-in amplifier. A multipoint PAS experiment to detect the water vapor at 1368.597 nm was implemented to verify the scheme we presented. With the three PAS gas cells, the linear response to the water vapor concentration of our sensors achieved 0.9978, 0.99591, and 0.99617, and their minimum detection limits were 479, 662, and 630 ppb, respectively.

No abstract

No abstract

We proposed a new method for gas detection in photoacoustic spectroscopy based on acousto-optic Q-switched fiber laser by merging a transmission PAS cell (resonant frequency f0 = 5.3 kHz) inside the fiber laser cavity. The Q-switching was achieved by an acousto-optic modulator, achieving a peak pulse power of ~679 mW in the case of the acousto-optic modulation signal with an optimized duty ratio of 10%. We used a custom-made fiber Bragg grating with a central wavelength of 1530.37 nm (the absorption peak of C2H2) to select the laser wavelength. The system achieved a linear response (R2 = 0.9941) in a concentration range from 400 to 7000 ppmv, and the minimum detection limit compared to that of a conventional intensity modulation system was enhanced by 94.2 times.

Abstract:Preamplifier circuit noise is of great importance in quartz enhanced photoacoustic spectroscopy (QEPAS) system. In this paper, several noise sources are evaluated and discussed in detail. Based on the noise characteristics, the corresponding noise reduction method is proposed. In addition, a frequency locked technique is introduced to further optimize the QEPAS system noise and improve signal, which achieves a better performance than the conventional frequency scan method. As a result, the signal-to-noise ratio (SNR) could be increased 14 times by utilizing frequency locked technique and numerical averaging technique in the QEPAS system for water vapor detection.