The development and application of natural antibacterial materials have always been the focus of biomedical research. Borneol as a natural antibacterial compound has received extensive attention. However, the hydrophobicity caused by its unique structure limits its application range to a certain extent. In this study, we combine zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) with a complex bicyclic monoterpene structure borneol compound and prepare an excellent antifouling and antibacterial surface via the Schiff-base bond. The prepared coating has excellent hydrophilicity verified by the contact angle (CA), and its polymer layer is confirmed by X-ray photoelectron spectroscopy (XPS). The zwitterion MPC and borneol moieties in the copolymer play a coordinating role, relying on super hydration and the special stereochemical structure to prevent protein adsorption and inhibit bacterial adhesion, respectively, which are demonstrated by bovine serum albumin (BSA) adsorption and antibacterial activity test. Moreover, the water-soluble borneol derivative as the antibacterial surfaces we designed here was biocompatible toward MRC-5 (lung fibroblasts), as showed by in vitro cytotoxicity assays. Such results indicate the potential application of the as-prepared hydrophilic surfaces in the biomedical materials.

Injectable hydrogels have become a promising material for biomedical engineering applications, but microbial infection remains a common challenge in their application. In this study, we presented an injectable antibacterial hydrogel with self-healing property based on a dual cross-linking network structure of dynamic benzoxaborole−sugar and quadruple hydrogen bonds of the 2-ureido-4-pyrimidone (UPy) moieties at physiological pH. Dynamic rheological experiments demonstrated the gelatinous behavior of the double cross-linking network (storage modulus G′ > loss modulus G″), and the modulus showed frequency-dependent behavior. The noncovalent interactions of UPy units in the polymer segment endowed the injectable hydrogels with good mechanical strength. By varying the solid contents, UPy units, as well as the pH, the mechanical properties of hydrogels could be controlled. Additionally, the hydrogels exhibited not only excellent selfhealing and injectable properties but also pH and sugar dual-responsiveness. Moreover, the hydrogels could effectively inhibit the growth of both Escherichia coli and Staphylococcus aureus while exhibiting low toxicity. 3D cell encapsulation experiment results also demonstrated the potential use of these hydrogels as cell culture scaffolds. Taken together, the injectability, self-healing, and antimicrobial properties of the prepared hydrogels showed great promise for translational medicine, such as cell and tissue engineering applications.

The rapid accumulation of dead bacteria or protein on a bactericidal surface can reduce the effectiveness of the modified surface and alter its biocidal activity by shielding the surface biocide functional groups, promoting microbial attachment and subsequent biofilm formation. Thus, the alteration of biocidal activity due to biofilm formation can cause serious trouble including severe infection or implant or medical device failure leading to death. Therefore, developing a smart self-cleaning surface is of great interest. Ideally, such a surface can not only kill the attached microbials but also release the dead cells and foulants from the surface under a particular incitement on demand. In this project, a sugar-responsive self-cleaning coating has been developed by forming covalent boronic ester bonds between catechol groups from polydopamine and a benzoxaborole pendant from zwitterionic and cationic polymers. To incorporate antifouling properties and enhance the biocompatibility of the coating, bioinspired zwitterionic compound 2-methacryloyloxyethyl phosphorylcholine (MPC) was chosen and benzoxaborole pendant containing zwitterionic polymer poly­(MPC-st-MAABO) (MAABO: 5-methacrylamido-1,2-benzoxaborole) was synthesized. Additionally to impart antibacterial properties to the surface, a quaternary ammonium containing cationic polymer poly­(2-(methacryloyloxy)­ethyl trimethylammonium (META)-st-MAABO)) was synthesized. These synthesized polymers were covalently grafted to a polydopamine (PDA) coated surface by forming a strong cyclic boronic ester complex with a catechol group of the PDA layer endowing the surface with bacteria contact-killing properties and capturing specific protein. After the addition of cis-diol containing competitive molecules, i.e., saccharides/sugars, this boronic ester complex with a catechol group of PDA was replaced and the attached polymer layer was cleaved from the surface, resulting in the release of both absorbed protein and live/killed bacteria electrostatically attached to the polymer layer. This dynamic self-cleaning surface can be a promising material for biomedical applications avoiding the gathering of dead cells and debris that are typically encountered on a traditional biocidal surface.

Antibacterial coatings have drawn much attention because of their high potential applications in medicine. However, the weak mechanical property, poor biosafety, and biocompatibility of most established antibacterial coatings restrict their applications. In this study, robust antibacterial coatings were fabricated via a simple organic–inorganic hybrid method. The polymer component provides an excellent antibacterial property to the coatings, and the hybrid silica sol improves the hardness of coatings. After cross-linking, network-structured coatings were formed. The coating surfaces exhibited high transmittance, excellent mechanical property, and good antibacterial effect against Escherichia coli (Gram-negative) and Streptococcus mutans (Gram-positive). Additionally, the robust coatings were noncytotoxic with satisfactory biocompatibility. Such results provide a theoretical basis for their applications in the biomedical field.

No abstract