No abstract

In the past two decades, alkene metathesis has risen in prominence to become a significant synthetic strategy for alkene formation. Many total syntheses of natural products have used this transformation. We review the use, from 2003 to 2015, of ring-closing alkene metathesis (RCM) for the generation of dihydrofurans or -pyrans in natural product synthesis. The strategies used to assemble the RCM precursors and the subsequent use of the newly formed unsaturation will also be highlighted and placed in context.

Bulk micromachining in Si (110) wafer is an essential process for fabricating vertical microstructures by wet chemical etching. We compared the anisotropic etching properties of potassium hydroxide (KOH), tetra-methyl ammonium hydroxide (TMAH) and ethylene di-amine pyro-catechol (EDP) solutions. A series of etching experiments have been carried out using different etchant concentration and temperatures. Etching at elevated temperatures was found to improve the surface quality as well as shorten the etching time in all the etchants. At 120°C, we get a smooth surface (Ra = 21.2 nm) with an etching rate 12.2 lm/min in 40wt% KOH solution. At 125°C, EDP solution (88wt%) was found to produce smoothest surface (Ra = 9.4 nm) with an etch rate of 1.8 lm/min. In TMAH solution (25wt%), the best surface roughness was found to be 35.6 nm (Ra) at 90°C with an etch rate of 1.18 lm/min. The activation energy and preexponential factor in Arrhenius relation are also estimated from the corresponding etch rate data.

CdSxTe1-x films (0