Fully-depleted (FD) tri-gate CMOS transistors with 60 nm physical gate lengths on SOI substrates have been fabricated. These devices consist of a top and two side gates on an insulating layer. The transistors show near-ideal subthreshold gradient and excellent DIBL behavior, and have drive current characteristics greater than any non-planar devices reported so far, for correctly-targeted threshold voltages. The tri-gate devices also demonstrate full depletion at silicon body dimensions approximately 1.5-2 times greater than either single gate SOI or non-planar double-gate SOI for similar gate lengths, indicating that these devices are easier to fabricate using the conventional fabrication tools. Comparing tri-gate transistors to conventional bulk CMOS device at the same technology node, these non-planar devices are found to be competitive with similarly-sized bulk CMOS transistors. Furthermore, three-dimensional (3-D) simulations of tri-gate transistors with transistor gate lengths down to 30 nm show that the 30 nm tri-gate device remains fully depleted, with near-ideal subthreshold swing and excellent short channel characteristics, suggesting that the tri-gate transistor could pose a viable alternative to bulk transistors in the near future.

No abstract

No abstract

Direct bandgap transition engineering using stress, alloying, and quantum confinement is proposed to achieve high performing complementary n and p tunneling field effect transistors (TFETs) based on group IV materials. The critical tensile stress for this transition decreases in Ge1−xSnx for Sn content 0≤x≤0.068, calculated with the Nonlocal Empirical Pseudopotential method. Direct sub eV bandgap leads to high ON current in both n and p Ge and Ge1−xSnx TFETs, simulated using the sp3d5s*-SO model. Ge and Ge1−xSnx show an advantage over III-V p TFETs achieving steep subthreshold operation, which is limited in III-V devices by their low density of electron states.

No abstract