The longevity of removable prostheses is mostly influenced by the properties of the used materials. The ability of the material to withstand high occlusal loads without deformation can enhance patient satisfaction and quality of life. This in vitro study aimed to investigate the wear and fracture resistance of three-dimensional (3D)-printed teeth compared with commercially available acrylic resin teeth. Materials and methods: A total of 40 prefabricated acrylic teeth and 40 3D-printed teeth were prepared in two forms: anatomical for fracture resistance or flat for wear resistance (n = 10). For wear evaluation, specimens were scanned at baseline and then subjected to thermal cycling (10,000 cycles). This was followed by a chewing simulator (60,000 cycles) against either metal or natural tooth. Then, the specimens were scanned again. Wear analysis was performed by superimposing the standard tessellation language (STL) files from baseline and the final scans with the aid of GOM Inspect 2020 software. Fracture resistance was assessed with a universal testing machine at a crosshead speed of 0.5 mm/min before and after thermal cycling. Data were analyzed with two-independent t-test and two-way ANOVA (α = 0.05). Results: The 3D-printed teeth showed significantly lower wear resistance than the prefabricated ones with both antagonists (metal, p = 0.049; natural tooth, p = 0.021). The fracture resistance of the 3D-printed teeth was significantly higher than that of the prefabricated teeth before thermocycling (p = 0.042). After thermal cycling, the fracture resistance of both groups was decreased with no significant differences between them (p = 0.266). Conclusions: The 3D-printed teeth showed lower wear resistance and higher fracture resistance than the prefabricated ones. Thermal cycling negatively affected the fracture resistance of 3D-printed teeth.

Severe acute respiratory syndrome coronavirus 2 (SARS CoV-2) became a major concern since the announcement that it is a pandemic in early 2020. Vaccine trials were started in November 2020, and completed rapidly due to the urgency to get over the infection. Side effects to vaccines started to be reported. There were minor side effects including site of injection pain and heaviness and constitutional symptoms like fever which are considered minor. One of the rare adverse events is post vaccine new onset autoimmune diseases. Methods: Data were obtained from one center in the eastern province of Saudi Arabia (King Fahd Hospital of University). All patient events reported occurred in the study period March 2021 to February 2022. We identified patients presenting with autoimmune diseases with exclusively new onset presentations. Results: We identified 31 cases of immune-mediated disease: 18 females (58%); 13 males (42%). Only 4 of them (13%) had an autoimmune background before COVID-19 vaccination. The average time between vaccination and new-onset disease symptoms was 7 days. Among all the cases in our study, 7 patients (22.5%) had new-onset vasculitis, 2 cases had IgA vasculitis and 5 cases had ANCA vasculitis, 6 cases had neurological diseases (19.3%), 4 cases (12.9%) had new-onset systemic lupus erythematosus (SLE), 3 cases (9.6%) presented with new-onset inflammatory arthritis, and one had Sjogren's syndrome (3.2%). Conclusion:Our study is unique as it is the first study to include the largest number (31 patients) of new onsets of confirmed autoimmune diseases related to Covid-19 vaccines.

Purpose Guidelines for managing neonatal hemolytic disease of the newborn (HDN) recommend a selective approach in the use of direct antiglobulin test (DAT). In Saudi Arabia, many hospitals still perform routine DAT for all newborns. This study assessed the need for phototherapy in relation to DAT results in full-term healthy newborns. Patients and Methods A retrospective analysis of all healthy newborns admitted during 2018 was performed. The primary outcome was the association of positive DAT results with phototherapy. Results There were 1463 newborns born during the study period. The DAT was positive at 4.4%. The 24-hour bilirubin levels were higher in DAT-positive cases ( P =0.06); however, peak bilirubin levels were not correlated with the DAT results ( P =0.717). Thirty-six neonates (2.46%) required phototherapy, and the need was similar among DAT-positive and DAT-negative cases ( P =0.271). The most common indication for phototherapy was clinical jaundice in 22 neonates (61.1%), followed by DAT positivity in 12 (33.3%) and hospital protocol in 2 patients (5.6%) ( P <0.01 by chi-square overall comparison). Conclusion Our results indicate that factors other than DAT positivity are important in assessing the need for phototherapy in newborns. Clinical signs of jaundice were indicators of high serum bilirubin levels and subsequent phototherapy, further indicating that the DAT test was overused in predicting the need for phototherapy.

The quality of medications is important to maintain the overall health care of patients. This study aims to develop and validate a spectrophotometric method using multivariate curve resolution-alternating least squares (MCR-ALS) with correlation constraint for simultaneous resolution and quantification of selected drugs affecting the central nervous system (imipramine, carbamazepine, chlorpromazine, haloperidol, and phenytoin) in different pharmaceutical dosage forms. Figures of merit such as root-mean-square error of prediction, bias, standard error of prediction, and relative error of prediction for the developed method were calculated. High values of correlation coefficients ranged between 0.9993 and 0.9998 reflected high predictive ability of the developed method. The results are linear in the concentration range of 0.3–5 μg/mL for carbamazepine, 0.3–15 μg/mL for chlorpromazine, 0.5–10 μg/mL for haloperidol, 0.5–10 μg/mL for imipramine, and 3–20 μg/mL for phenytoin. The optimized method was successfully applied for the analysis of the studied drugs in their pharmaceutical products without any separation step. The optimized method was also compared with a reported HPLC method using Student’s t test and F ratio at 95% confidence level, and the results showed no significant difference regarding accuracy and precision. The proposed chemometric method is fast, reliable, and cost-effective and can be used as an eco-friendly alternative to chromatographic techniques for the analysis of the studied drugs in commercial pharmaceutical products.

This study aimed to identify the characteristics of pediatric primary health care (PHC) visits and evaluate the outcomes of patients presenting with complaints along with their referral and consultation capabilities. This was a retrospective medical record-based study. The study population included any pediatric patient (≤14 years old), including females and males, Saudis, and non-Saudis. Research data were gathered for visits from 2016–2021. Sampling was performed using a stratified random sample based on age groups, followed by simple random sampling with proportional allocation to different age groups. The number of pediatric visits included was 1439 (males, 52.2%). The most common age group was toddlers, and 60% of the total sample was from Saudi Arabia. The most common cause of visits was vaccination (32%), followed by general checkups and/or a well-baby visit (25.4%), and fever (11.2%). Approximately 10% of visits needed referral to other subspecialties. Approximately 50% of visits with complaints concerning ophthalmology, cardiology, and surgical intervention were referred to a specialized department. More awareness needs to be raised about the important role of PHC services in the pediatric age group, as it was capable of handling approximately 90% of their cases.