When a dilute polymer solution experiences capillary thinning, it forms an almost uniformly cylindrical thread, which we study experimentally. In the last stages of thinning, when polymers have become fully stretched, the filament becomes prone to instabilities, of which we describe two: a novel breathing instability, originating from the edge of the filament, and a sinusoidal instability in the interior, which ultimately gives rise to a blistering pattern of beads on the filament. We describe the linear instability with a spatial resolution of 80 nm in the disturbance amplitude. For sufficiently high polymer concentrations, the filament eventually separates out into a "solid" phase of entangled polymers, connected by fluid beads. A solid polymer fiber of about 100 nm thickness remains, which is essentially permanent.

The capillary break-up of a polymer solution evolves via a series of stages. After the initial instability a long-lived cylindrical filament is formed, which thins exponentially in time, while the flow is purely extensional. During the final stages of the thinning process, at which the polymers are stretched sufficiently for the filament to become unstable to a Rayleigh-Plateau-like instability, a complex flow pattern develops, which we describe here. Achieving a high spatial resolution well below the optical Rayleigh limit, we describe both the formation of individual droplets as well as that of periodic patterns. Following the periodic instability, a blistering pattern appears, with different generations of smaller droplets. At sufficiently high polymer concentrations, the filament does not break at all, but a solid polymeric fiber with a thickness well below a micron remains. The experiments were performed for various polymer and solvent systems, all of which showed the same qualitative behavior for most of the observed features.

We report a technique based on Fresnel diffraction with white illumination that permits the resolution of capillary surface patterns of less than 100 nanometers. We investigate Rayleigh Plateaux like instability on a viscoelastic capillary bridge and show that we can overcome the resolution limit of optical microscopy. The viscoelastic filaments are approximately 20 microns thick at the end of the thinning process when the instability sets in. The wavy distortions grow exponentially in time and the pattern is resolved by an image treatment that is based on an approximation of the measured rising flank of the first Fresnel peak.

We studied the microscopic polymer conformations in the droplet detachment process of an elastic semi-dilute polyelectrolytic Xanthan solution by measuring the instantaneous birefringence. As in earlier studies, we observe the suppression of the finite time singularity of the pinch-off process and the occurrence of an elastic filament. Our microscopic measurements reveal that the relatively stiff Xanthan molecules are already significantly pre-stretched to about 90 % of their final extension at the moment the filament appears. At later stages of the detachment process, we find evidence of a concentration enhancement due to the elongational flow.83.80. Rs, 47.20.Gv,

No abstract