No abstract

No abstract

Since the Industrial Revolution, technological advances have generated enormous emissions of various pollutants affecting all ecosystems. The detection and degradation of pollutants has therefore become a critical issue. More than 59 different remediation technologies have already been developed, such as biological remediation, and physicochemical and electrochemical methods. Among these techniques, advanced oxidation processes (AOPs) have been popularized in the treatment of wastewater. The use of ZnO as a photocatalyst for water remediation has been developing fast in recent years. In this work, the goals are to produce ZnO photocatalysts with different morphologies, by using a green sol-gel process, and to study both the influence of the synthesis parameters on the resulting morphology, and the influence of these different morphologies on the photocatalytic activity, for the degradation of an organic pollutant in water. Multiple morphologies were produced (nanotubes, nanorods, nanospheres), with the same crystalline phase (wurtzite). The most important parameter controlling the shape and size was found to be pH. The photoactivity study on a model of pollutant degradation shows that the resulting activity is mainly governed by the specific surface area of the material. A comparison with a commercial TiO2 photocatalyst (Evonik P25) showed that the best ZnO produced with this green process can reach similar photoactivity without a calcination step.

Front Cover: In article number 1900561 by Maria Isabel Felisberti and co‐workers, ABA and BAB triblock amphiphilic copolymers based on sucrose methacrylate, a monomer obtained from a renewable source, are synthesized by reversible addition–fragmentation chain transfer polymerization. They are capable of self‐assembly in solution, forming aggregates, whose morphologies depend on the composition, molar mass, and architecture of the copolymers, and are capable of stabilizing water–oil emulsions.

This work reviews an eco-friendly process for producing TiO2 via colloidal aqueous sol–gel synthesis, resulting in crystalline materials without a calcination step. Three types of colloidal aqueous TiO2 are reviewed: the as-synthesized type obtained directly after synthesis, without any specific treatment; the calcined, obtained after a subsequent calcination step; and the hydrothermal, obtained after a specific autoclave treatment. This eco-friendly process is based on the hydrolysis of a Ti precursor in excess of water, followed by the peptization of the precipitated TiO2. Compared to classical TiO2 synthesis, this method results in crystalline TiO2 nanoparticles without any thermal treatment and uses only small amounts of organic chemicals. Depending on the synthesis parameters, the three crystalline phases of TiO2 (anatase, brookite, and rutile) can be obtained. The morphology of the nanoparticles can also be tailored by the synthesis parameters. The most important parameter is the peptizing agent. Indeed, depending on its acidic or basic character and also on its amount, it can modulate the crystallinity and morphology of TiO2. Colloidal aqueous TiO2 photocatalysts are mainly being used in various photocatalytic reactions for organic pollutant degradation. The as-synthesized materials seem to have equivalent photocatalytic efficiency to the photocatalysts post-treated with thermal treatments and the commercial Evonik Aeroxide P25, which is produced by a high-temperature process. Indeed, as-prepared, the TiO2 photocatalysts present a high specific surface area and crystalline phases. Emerging applications are also referenced, such as elaborating catalysts for fuel cells, nanocomposite drug delivery systems, or the inkjet printing of microstructures. Only a few works have explored these new properties, giving a lot of potential avenues for studying this eco-friendly TiO2 synthesis method for innovative implementations.