A flexible field-effect transistor with a poly(3-hexylthiophene) (P3HT) active channel and a ferroelectric poly(vinlyidene fluoride-co-trifluoro ethylene) (PVDF-TrFE) insulator exhibits gate-voltage-controllable multilevel non-volatile memory characteristics with highly reliable data retention and endurance.

The photocurrent conversions of transition metal dichalcogenide nanosheets are unprecedentedly impressive, making them great candidates for visible range photodetectors. Here we demonstrate a method for fabricating micron-thick, flexible films consisting of a variety of highly separated transition metal dichalcogenide nanosheets for excellent band-selective photodetection. Our method is based on the non-destructive modification of transition metal dichalcogenide sheets with amine-terminated polymers. The universal interaction between amine and transition metal resulted in scalable, stable and high concentration dispersions of a single to a few layers of numerous transition metal dichalcogenides. Our MoSe2 and MoS2 composites are highly photoconductive even at bending radii as low as 200 μm on illumination of near infrared and visible light, respectively. More interestingly, simple solution mixing of MoSe2 and MoS2 gives rise to blended composite films in which the photodetection properties were controllable. The MoS2/MoSe2 (5:5) film showed broad range photodetection suitable for both visible and near infrared spectra.

High-performance non-volatile memory that can operate under various mechanical deformations such as bending and folding is in great demand for the future smart wearable and foldable electronics. Here we demonstrate non-volatile solution-processed ferroelectric organic field-effect transistor memories operating in p-and n-type dual mode, with excellent mechanical flexibility. Our devices contain a ferroelectric poly(vinylidene fluoride-cotrifluoroethylene) thin insulator layer and use a quinoidal oligothiophene derivative (QQT(CN)4) as organic semiconductor. Our dual-mode field-effect devices are highly reliable with data retention and endurance of 46,000 s and 100 cycles, respectively, even after 1,000 bending cycles at both extreme bending radii as low as 500 mm and with sharp folding involving inelastic deformation of the device. Nano-indentation and nano scratch studies are performed to characterize the mechanical properties of organic layers and understand the crucial role played by QQT(CN)4 on the mechanical flexibility of our devices.

Polymer ferroelectric‐gate field effect transistors (Fe‐FETs) employing ferroelectric polymer thin films as gate insulators are highly attractive as a next‐generation non‐volatile memory. Furthermore, polymer Fe‐FETs have been recently of interest owing to their capability of storing data in more than 2 states in a single device, that is, they have multi‐level cell (MLC) operation potential for high density data storage. However, among a variety of technological issues of MLC polymer Fe‐FETs, the requirement of high voltage for cell operation is one of the most urgent problems. Here, a low voltage operating MLC polymer Fe‐FET memory with a high dielectric constant (k) ferroelectric polymer insulator is presented. Effective enhancement of capacitance of the ferroelectric gate insulator layer is achieved by a simple binary solution‐blend of a ferroelectric poly(vinylidene fluoride‐co‐trifluoroethylene) (PVDF‐TrFE) (k ≈ 8) with a relaxer high‐k poly(vinylidene‐fluoride–trifluoroethylene–chlorotrifluoroethylene) (PVDF‐TrFE‐CTFE) (k ≈ 18). At optimized conditions, a ferroelectric insulator with a PVDF‐TrFE/PVDF‐TrFE‐CTFE (10/5) blend composition enables the discrete six‐level multi‐state operation of a MLC Fe‐FET at a gate voltage sweep of ±18 V with excellent data retention and endurance of each state of more than 104 s and 120 cycles, respectively.

Interactive displays involve the interfacing of a stimuli-responsive sensor with a visual human-readable response. Here, we describe a polymeric electroluminescence-based stimuli-responsive display method that simultaneously detects external stimuli and visualizes the stimulant object. This organic light-emitting board is capable of both sensing and direct visualization of a variety of conductive information. Simultaneous sensing and visualization of the conductive substance is achieved when the conductive object is coupled with the light emissive material layer on application of alternating current. A variety of conductive materials can be detected regardless of their work functions, and thus information written by a conductive pen is clearly visualized, as is a human fingerprint with natural conductivity. Furthermore, we demonstrate that integration of the organic light-emitting board with a fluidic channel readily allows for dynamic monitoring of metallic liquid flow through the channel, which may be suitable for biological detection and imaging applications.