Radio polarimetry at decimetre wavelengths is the principal source of information on the Galactic magnetic field. The diffuse polarized emission is strongly influenced by Faraday rotation in the magneto-ionic medium and rotation measure is the prime quantity of interest, implying that all Stokes parameters must be measured over wide frequency bands with many frequency channels. The DRAO 26-m Telescope has been equipped with a wideband feed, a polarization transducer to deliver both hands of circular polarization, and a receiver, all operating from 1277 to 1762 MHz. Half-power beamwidth is between 40 and 30 arcminutes. A digital FPGA spectrometer, based on commercially available components, produces all Stokes parameters in 2048 frequency channels over a 485-MHz bandwidth. Signals are digitized to 8 bits and a Fast Fourier Transform is applied to each data stream. Stokes parameters are then generated in each frequency channel. This instrument is in use at DRAO for a Northern sky polarization survey. Observations consist of scans up and down the Meridian at a drive rate of ∼0.9 • per minute to give complete coverage of the sky between declinations −30 • and 90 • . This paper presents a complete description of the receiver and data acquisition system. Only a small fraction of the frequency band of operation is allocated for radio astronomy, and about 20% of the data are lost to interference. The first 8% of data from the survey are used for a proof-of-concept study, which has led to the first application of Rotation Measure Synthesis to the diffuse Galactic emission obtained with a single-antenna telescope. We find rotation measure values for the diffuse emission as high as ∼ ±100 rad m −2 , much higher than recorded in earlier work.

No abstract

No abstract

No abstract

Low-noise phased-array feeds are a new way to expand the field of view of radio telescopes at centimetre wavelengths. First generation engineering demonstrators of this technology have been constructed and tested by several institutes worldwide. The development of second-generation phased-array feeds is now underway. We describe one effort to design and build an astronomy-capable phased-array feed using techniques to reduce front-end noise and increase system bandwidth.