We report on the first year of calendar ageing of commercial high‐energy 21700 lithium‐ion cells, varying over eight state of charge (SoC) and three temperature values. Lithium‐nickel‐cobalt‐aluminium oxide (NCA) and graphite with silicon suboxide (Gr‐SiOx) form cathodes and anodes of those cells, respectively. Degradation is fastest for cells at 70–80 % SoC according to monthly electrochemical check‐up tests. Cells kept at 100 % SoC do not show the fastest capacity fade but develop internal short circuits for temperatures T≥40 °C. Degradation is slowest for cells stored close to 0 % SoC at all temperatures. Rates of capacity fade and their temperature dependencies are distinctly different for SoC values below and above 60 %, respectively. Differential voltage analyses, apparent activation energy analysis, and endpoint slippage tracking provide useful insights into the degradation mechanisms and the respective roles of anode and cathode potential. We discuss how reversible losses of lithium might play a role in alleviating the rate of irreversible losses on commercial cells.

We report on a cycle ageing study of commercial NCA/Gr+Si cells, in which reversible capacity fluctuations turn a central experimental finding upside down: an upper voltage limit of 4.1 V seems to cause faster degradation than going all the way to 4.2 V. The underlying effect is the reversible loss of lithium inventory into passive anode overhang areas. We demonstrate how the resulting artefact arises from a combination of slow transport processes and the related time periods spent in specific state-of-charge regions. We propose an alternative visualisation tool to identify and manage such artefacts, often neglected in typical ageing studies.

Graphite-silicon (Gr-Si) blends have become common in commercial Li-ion battery negative electrodes, offering increased capacity over pure graphite. Lithiation/delithiation of the silicon particles results in volume changes, which may be associated with increased hysteresis of the open circuit potential (OCP). The OCP is a function of both concentration and temperature. Entropy change measurement, which probes the response of the OCP to temperature, offers a unique battery diagnostics tool. While entropy change measurements have previously been applied to study degradation, the implications of Si additives on the entropy profiles of commercial cells have not been explored. Here, we use entropy profiling to track aging markers in the same way as differential voltage analysis. In addition to lithiation/delithiation hysteresis in the OCP of Gr-Si blends, cells with Gr-Si anodes also exhibit differences in entropy profile depending on cycling direction, reflecting degradation-related morphological changes. For cycled cells, entropy change decreased during discharge, likely corresponding to graphite particles breaking and cracking. However, entropy change during charge increased with cycling, likely due to the volume change of silicon. Over a broad voltage range, these combined effects led to the observed rise in entropy hysteresis with age. Conversely, for calendar aged cells entropy hysteresis remained stable.

Invited for this month's cover picture is the group of Prof. Harry Hoster at Lancaster University. The cover picture illustrates how state of charge (SoC) influences the capacity fade of a widely employed automotive Li‐ion battery chemistry when idle, e.g. when EVs are parked. The chemical degradation is revealed to be aggravated when devices are kept at around 80 % SoC. Read the full text of the Article at 10.1002/batt.202100046.

The Front Cover illustrates how state of charge (SoC) influences the capacity fade of a widely employed automotive Li‐ion battery chemistry when idle, e.g., when EVs are parked. The chemical degradation is revealed to be aggravated when devices are kept at around 80 % SoC. More information can be found in the Article by A. Zülke and co‐workers.