No abstract

For the design of offshore structures in harsh wave environments, model testing continues to be the recommended industry practice for determining wave impact forces on offshore structures. Accurate measurements of wave impacts in model tests have been a challenge for several decades. Transducers are required to accurately capture the short duration, high magnitude, and dynamic nature of impact loads. The structural model, transducers, and the transducer mountings need to be designed such that mechanical vibrations in the integrated transducer-mounting-structural model system do not contaminate the wave impact measurements. In this work, the dynamic oscillations in the measurements were controlled through the design and fabrication of transducers, their mounting and the GBS model. Wave crest probability distributions were developed that included fully nonlinear effects. These distributions were used as a benchmark to qualify the waves in the wave calibration tests. The highly stochastic nature of impact loads makes it challenging to obtain converged probability distributions of the maximum impact loads (i.e. forces or pressures) from model tests. To increase the confidence in the statistical values of wave impact loads, a large number of realizations were used for a given sea state. Variability of the maximum pressure due to wave basin effects (such as wait-time between tests) was examined with fifteen repeat tests using the same wave maker control signal. These tests provided insights into the random behavior of the impact loads.

ExxonMobil Canada Properties and its co-venturers are building a gravity based structure (GBS) in Newfoundland and Labrador to be installed on the Hebron Field offshore Eastern Canada. This area is characterized by harsh storms with large waves and high winds. The geometry of the Hebron GBS has an effect on the behavior of the incident waves with regards to their likelihood of breaking onto the shaft. Model tests of the structure in storm waves were executed to provide local wave impact load data on the shaft of the GBS. These tests required significant planning and design of the model, environment, and instrumentation in order to properly satisfy the test objectives. The results of the test showed that the measured wave impact loads on the structure were highly variable, requiring a long-term, response based method to quantify the design loads on an annual exceedance basis. In this paper, we discuss the salient aspects of the model testing effort and the long-term analysis approach which was utilized to define the wave impact loads that were incorporated into the Hebron GBS structural design.

No abstract

For the design of offshore structures in harsh wave environments, it is essential to accurately determine the wave impact loads on the structure. To date, robust numerical prediction methods / algorithms for determining wave impact forces on offshore structures do not exist. Model testing continues to be the industry practice for determining wave impact forces on offshore structures. Accurate measurements of wave impact loads in model tests have been challenging for several decades. Transducers require the ability to capture the short duration, dynamic nature and high magnitude of impact loads. In order to qualify transducers for these types of measurements, we need to develop a way to physically impose dynamic impact loads on the transducers and to establish benchmark values that can be used to check the effectiveness of their measurements. In this paper, we present our recent research work on transducer qualification for wave impact load measurements, including their development, numerical analysis and wedge drop model tests. Our findings show that wedge drop tests can be used to impose dynamic impact loads for transducer qualification, and that the Wagner solution and / or validated computational fluid dynamics (CFD) simulations that include the effects of viscosity, compressibility and hydroelasticity can provide the appropriate benchmarking values. Numerical simulation results, model test measurements and findings on transducer qualification are presented and discussed in the paper.