A fully implantable wireless pressure sensor system was developed to monitor bladder pressures in vivo. The system comprises a small commercial pressure die connected via catheter to amplifying electronics, a microcontroller, wireless transmitter, battery, and a personal digital assistant (PDA) or computer to receive the wireless data. The sensor is fully implantable and transmits pressure data once every second with a pressure detection range of 1.5 psi gauge and a resolution of 0.02 psi. In vitro calibration measurements of the device showed a high degree of linearity and excellent temporal response. The implanted device performed continuously in vivo in several porcine studies lasting over 3 days. This system can be adapted for other pressure readings, as well as other vital sign measurements; it represents the first step in developing a ubiquitous sensing platform for telemedicine and remote patient monitoring.

Direct measurements of arterial blood pressure most commonly use bulky external instrumentation containing a pressure transducer connected to an ex vivo fluid-filled arterial line, which is subject to several sensing artifacts. In situ blood pressure sensors, typically solid state piezoresistive, capacitive, and interferometric sensors, are unaffected by these artifacts, but can be expensive to produce and miniaturize. We have developed an alternative approach to blood pressure measurement based on deformation of an elastic tube filled with electrolyte solution. Simple measurement of the electrical conductance of this solution as the tube dimensions change allows determination of the external pressure. The sensor is made from inexpensive materials and its miniaturization is straightforward. In vitro static testing of initial sensor prototypes mounted on a catheter tip showed a linear response with applied pressure and a resolution of 1 mmHg. In vivo sensing followed catheterization of the sensor into the femoral artery of a porcine model through a 7F catheter port. The sensor performed comparably to a commercial pressure transducer also connected to the catheter port. Due to its scalability and cost, this sensor has the potential for use in a range of pressure sensing applications, such as measurement of intracranial, spinal, or interstitial pressures.

The improvement in processor performance through continuous breakthroughs in transistor technology has resulted in the proliferation of lightweight embedded systems. Advances in wireless technology and embedded systems have enabled remote healthcare and telemedicine. While medical examinations could previously extract only localized symptoms through snapshots, now continuous monitoring can discretely analyze how a patient's lifestyle affects his/her physiological conditions and if additional symptoms occur under various stimuli. We demonstrate how medical applications in particular benefit from a hierarchical networking scheme that will improve the quantity and quality of ubiquitous data collection. Our Telehealth networking infrastructure provides flexibility in terms of functionality and the type of applications that it supports. We specifically present a case study that demonstrates the effectiveness of our networked embedded infrastructure in an in vivo pressure application. Experimental results of the in vivo system demonstrate how it can wirelessly transmit pressure readings measuring from 0 to 1.5 lbf/in (2) with an accuracy of 0.02 lbf/in (2). The challenges in biocompatible packaging, transducer drift, power management, and in vivo signal transmission are also discussed. This research brings researchers a step closer to continuous, real-time systemic monitoring that will allow one to analyze the dynamic human physiology.

No abstract

Direct measurements of arterial blood pressure most commonly use bulky external instrumentation containing a pressure transducer connected to an ex vivo fluid-filled arterial line, which is subject to several sensing artifacts. In situ blood pressure sensors, typically solid state piezoresistive, capacitive, and interferometric sensors, are unaffected by these artifacts, but can be expensive to produce and miniaturize. We have developed an alternative approach to blood pressure measurement based on deformation of an elastic tube filled with electrolyte solution. We have constructed an analytical model describing the deformation of a fluid-filled tube part of which is exposed to external pressure, with the remaining part unexposed. The model predicts pressure-induced change in dimension of the internal electrolyte-filled volume and a resultant change in its electrical resistance, which can be measured to determine the pressure and is the basis for the sensor operation. We have applied the model to find the pressure sensitivity of fractional change in resistance as a function of device material and dimensional parameters. Construction and testing of a device is described in the following paper.