Turbulent rotating convection in a cylinder is investigated both numerically and experimentally at Rayleigh number Ra = 10 9 and Prandtl number σ = 6.4. In this Letter we discuss two topics: the breakdown under rotation of the domain-filling large-scale circulation (LSC) typical for confined convection, and the convective heat transfer through the fluid layer, expressed by the Nusselt number. The presence of the LSC is addressed for several rotation rates. For Rossby numbers Ro 1.2 no LSC is found (the Rossby number indicates relative importance of buoyancy over rotation, hence small Ro indicates strong rotation). For larger Rossby numbers a precession of the LSC in anticyclonic direction (counter to the background rotation) is observed. It is shown that the heat transfer has a maximal value close to Ro = 0.18 being about 15% larger than in the non-rotating case Ro = ∞. Since the LSC is no longer present at this Rossby value we conclude that the peak heat transfer is independent of the LSC.

The effects of an axial rotation on the turbulent convective flow because of an adverse temperature gradient in a water-filled upright cylindrical vessel are investigated. Both direct numerical simulations and experiments applying stereoscopic particle image velocimetry are performed. The focus is on the gathering of turbulence statistics that describe the effects of rotation on turbulent Rayleigh–Bénard convection. Rotation is an important addition, which is relevant in many geophysical and astrophysical flow phenomena.A constant Rayleigh number (dimensionless strength of the destabilizing temperature gradient) Ra = 109 and Prandtl number (describing the diffusive fluid properties) σ = 6.4 are applied. The rotation rate, given by the convective Rossby number Ro (ratio of buoyancy and Coriolis force), takes values in the range 0.045 ≤ Ro ≤ ∞, i.e. between rotation-dominated flow and zero rotation. Generally, rotation attenuates the intensity of the turbulence and promotes the formation of slender vertical tube-like vortices rather than the global circulation cell observed without rotation. Above Ro ≈ 3 there is hardly any effect of the rotation on the flow. The root-mean-square (r.m.s.) values of vertical velocity and vertical vorticity show an increase when Ro is lowered below Ro ≈ 3, which may be an indication of the activation of the Ekman pumping mechanism in the boundary layers at the bottom and top plates. The r.m.s. fluctuations of horizontal and vertical velocity, in both experiment and simulation, decrease with decreasing Ro and show an approximate power-law behaviour of the shape Ro0.2 in the range 0.1 ≲ Ro ≲ 2. In the same Ro range the temperature r.m.s. fluctuations show an opposite trend, with an approximate negative power-law exponent Ro−0.32. In this Rossby number range the r.m.s. vorticity has hardly any dependence on Ro, apart from an increase close to the plates for Ro approaching 0.1. Below Ro ≈ 0.1 there is strong damping of turbulence by rotation, as the r.m.s. velocities and vorticities as well as the turbulent heat transfer are strongly diminished. The active Ekman boundary layers near the bottom and top plates cause a bias towards cyclonic vorticity in the flow, as is shown with probability density functions of vorticity. Rotation induces a correlation between vertical vorticity and vertical velocity close to the top and bottom plates: near the top plate downward velocity is correlated with positive/cyclonic vorticity and vice versa (close to the bottom plate upward velocity is correlated with positive vorticity), pointing to the vortical plumes. In contrast with the well-mixed mean isothermal bulk of non-rotating convection, rotation causes a mean bulk temperature gradient. The viscous boundary layers scale as the theoretical Ekman and Stewartson layers with rotation, while the thermal boundary layer is unaffected by rotation. Rotation enhances differences in local anisotropy, quantified using the invariants of the anisotropy tensor: under rotation there is strong turbulence anisotropy in the centre, while near the plates a near-isotropic state is found.

Rayleigh-Bénard (RB) convection, the flow in a fluid layer heated from below and cooled from above, is used to analyze the transition to the geostrophic regime of thermal convection. In the geostrophic regime, which is of direct relevance to most geo-and astrophysical flows, the system is strongly rotated while maintaining a sufficiently large thermal driving to generate turbulence. We directly simulate the Navier-Stokes equations for two values of the thermal forcing, i.e. Ra = 10 10 and Ra = 5 · 10 10 , a constant Prandtl number P r = 1, and vary the Ekman number in the range Ek = 1.3 · 10 −7 to Ek = 2 · 10 −6 which satisfies both requirements of super-criticality and strong rotation. We focus on the differences between the application of no-slip vs. stress-free boundary conditions on the horizontal plates. The transition is found at roughly the same parameter values for both boundary conditions, i.e. at Ek ≈ 9 × 10 −7 for Ra = 1 × 10 10 and at Ek ≈ 3 × 10 −7 for Ra = 5 × 10 10 . However, the transition is gradual and it does not exactly coincide in Ek for different flow indicators. In particular, we report the characteristics of the transitions in the heat transfer scaling laws, the boundary-layer thicknesses, the bulk/boundary-layer distribution of dissipations and the mean temperature gradient in the bulk. The flow phenomenology in the geostrophic regime evolves differently for no-slip and stress-free plates. For stress-free conditions the formation of a large-scale barotropic vortex with associated inverse energy cascade is apparent. For no-slip plates, a turbulent state without large-scale coherent structures is found; the absence of largescale structure formation is reflected in the energy transfer in the sense that the inverse cascade, present for stress-free boundary conditions, vanishes. arXiv:1409.6469v2 [physics.flu-dyn]

When the classical Rayleigh-Bénard (RB) system is rotated about its vertical axis roughly three regimes can be identified. In regime I (weak rotation) the large scale circulation (LSC) is the dominant feature of the flow. In regime II (moderate rotation) the LSC is replaced by vertically aligned vortices. Regime III (strong rotation) is characterized by suppression of the vertical velocity fluctuations. Using results from experiments and direct numerical simulations of RB convection for a cell with a diameter-to-height aspect ratio equal to one at Ra ∼ 10 8 − 10 9 (P r = 4 − 6) and 0 1/Ro 25 we identified the characteristics of the azimuthal temperature profiles at the sidewall in the different regimes. In regime I the azimuthal wall temperature profile shows a cosine shape and a vertical temperature gradient due to plumes that travel with the LSC close to the sidewall. In regime II and III this cosine profile disappears, but the vertical wall temperature gradient is still observed. It turns out that the vertical wall temperature gradient in regimes II and III has a different origin than that observed in regime I. It is caused by boundary layer dynamics characteristic for rotating flows, which drives a secondary flow that transports hot fluid up the sidewall in the lower part of the container and cold fluid downwards along the sidewall in the top part. arXiv:1109.6867v1 [physics.flu-dyn]

Recent studies of rotating Rayleigh-Bénard convection at high rotation rates and strong thermal forcing have shown a significant discrepancy in total heat transport between experiments on a confined cylindrical domain on the one hand and simulations on a laterally unconfined periodic domain on the other. This paper addresses this discrepancy using direct numerical simulations on a cylindrical domain. An analysis of the flow field reveals a region of enhanced convection near the wall, the sidewall circulation. The sidewall circulation rotates slowly within the cylinder in anticyclonic direction. It has a convoluted structure, illustrated by mean flow fields in horizontal cross-sections of the flow where instantaneous snapshots are compensated for the orientation of the sidewall circulation before averaging. Through separate analysis of the sidewall region and the inner bulk flow, we find that for higher values of the thermal forcing the heat transport in the inner part of the cylindrical domain, outside the sidewall circulation region, coincides with the heat transport on the unconfined periodic domain. Thus the sidewall circulation accounts for the differences in heat transfer between the two considered domains, while in the bulk the turbulent heat flux is the same as that of a laterally unbounded periodic domain. Therefore, experiments, with their inherent confinement, can still provide turbulence akin to the unbounded domains of simulations, and at more extreme values of the governing parameters for thermal forcing and rotation. We also provide experimental evidence for the existence of the sidewall circulation that is in close agreement with the simulation results.