Supercontinuum spanning over an octave from 900 - 2300 nm is reported in an all-normal dispersion, soft glass photonic crystal fiber. The all-solid microstructured fiber was engineered to achieve a normal dispersion profile flattened to within -50 to -30 ps/nm/km in the wavelength range of 1100 - 2700 nm. Under pumping with 75 fs pulses centered at 1550 nm, the recorded spectral flatness is 7 dB in the 930 - 2170 nm range, and significantly less if cladding modes present in the uncoated photonic crystal fiber are removed. To the best of our knowledge, this is the first report of an octave-spanning, all-normal dispersion supercontinuum generation in a non-silica microstructured fiber, where the spectrum long-wavelength edge is red-shifted to as far as 2300 nm. This is also an important step in moving the concept of ultrafast coherent supercontinuum generation in all-normal dispersion fibers further towards the mid-infrared spectral region.

Photonic crystal fibers are a new class of optical fibers. Their artificial crystal-like microstructure results in a number of unusual properties. They can guide light not only through a well-known total internal reflection mechanism but using also photonic bandgap effect. In this paper different properties possible to obtain in photonic crystal fibers are reviewed. Fabrication and modeling methods are also discussed.

In this paper we report on successful supercontinuum generation extending from the near to the mid-infrared region in the range 700-2500 nm in a micro-structured fiber made of lead-bismuth-galate glass and pumped in the femtosecond regime with a wavelength of 1540 nm. The flatness of 5 dB is observed in most of the registered spectrum 1000 -2500 nm. The improved spectral and thermo-physical properties of this custom made lead-bismuth-galate glass against tellurite and commercially available heavy oxide SF-57 glasses are presented.

We demonstrate that commercially available poly(D,L-lactic acid) (PDLLA) is a suitable material for the fabrication of biodegradable optical fibers with a standard heat drawing process. To do so we report on the chemical and optical characterization of the material. We address the influence of the polymer processing on the molecular weight and thermal properties of the polymer following the preparation of the polymer preforms and the fiber optic drawing process. We show that cutback measurements of the first optical fibers drawn from PDLLA return an attenuation coefficient as low as 0.11 dB/cm at 772 nm, which is the lowest loss reported this far for optical fibers drawn from bio-resorbable material. We also report on the dispersion characteristics of PDLLA, and we find that the thermo-optic coefficient is in the range of −10 −4°C−1. Finally, we studied the degradation of PDLLA fibers in vitro, revealing that fibers with the largest diameter of 600 µm degrade faster than those with smaller diameters of 300 and 200 µm and feature more than 84% molecular weight loss over a period of 3 months. The evolution of the optical loss of the fibers as a function of time during immersion in phosphate-buffered saline indicates that these devices are potential candidates for use in photodynamic therapy-like application scenarios.