No abstract

No abstract

Temperature measurement by infrared thermography is a technique that is widely used in predictive maintenance to detect faults. The uncertainty involved in measuring temperature by thermography is not only due to the imager, but also due to the measurements and estimates made by the user: emissivity of the inspected object, distance, temperature, and relative humidity of the propagation medium, temperature of objects located in the ambient, and the imager itself. This measurement uncertainty should be available for the thermographer to be able to make a more accurate diagnosis. The methods available in the literature to estimate the uncertainty of measured temperature usually require information nonaccessible to the regular thermographer. This paper proposes a method for calculating the uncertainty of temperature that requires only data available to the thermographer. This method is useful under usual conditions in predictive maintenance-short distance (7.5 to 14 μm) thermal imagers, no fog or rain, among others. It provides results similar to methods that use models that are not available or reserved by the manufacturers of imagers. The results indicate that not all sources of uncertainty are relevant in measurement uncertainty. However, the total uncertainty can be so high that it may lead to misdiagnosis. © The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

No abstract

This paper proposes a new design methodology for discrete multi-pumped Raman amplifier. In a multi-objective optimization scenario, in a first step the whole solution-space is inspected by a CW analytical formulation. Then, the most promising solutions are fully investigated by a rigorous numerical treatment and the Raman amplification performance is thus determined by the combination of analytical and numerical approaches. As an application of our methodology we designed an photonic crystal fiber Raman amplifier configuration which provides low ripple, high gain, clear eye opening and a low power penalty. The amplifier configuration also enables to fully compensate the dispersion introduced by a 70-km singlemode fiber in a 10 Gbit/s system. We have successfully obtained a configuration with 8.5 dB average gain over the C-band and 0.71 dB ripple with almost zero eye-penalty using only two pump lasers with relatively low pump power.