We have developed a 2.5D finite-element modeling (FEM) method for marine controlled-source electromagnetic (CSEM) applications in stratified anisotropic media. The main feature of the method is that delta sources are used to solve the governing partial differential equations for cases with and without a resistive target and to obtain the difference of these two solutions as the scattered field from the target. The total field is then the sum of the analytical background field calculated with a 1D modeling method and the difference or scattered field mentioned above. Compared with a conventional direct solution (using delta sources directly in a 2.5D formulation), the new method has smaller near-field error as a result of the source singularity and smaller boundary reflections. The new method does not require a dense mesh in the source region, which thereby reduces the total number of variables to be solved. In this way, the modeling time can be kept within a few minutes for some cases. We show that the maximum relative error of the calculation can be kept within 2% for targets at depths of approximately [Formula: see text]. The method is valid for stratified anisotropic media. The anisotropic modeling examples show that (1) marine CSEM is predominantly sensitive to target vertical resistivity and not to target horizontal resistivity, provided that the targets are thin, horizontal, high-resistivity layers and (2) marine CSEM is sensitive to the horizontal resistivity of the conductive sediments surrounding the target (e.g., the overburden).

A B S T R A C TA recently developed laboratory method allows for simultaneous imaging of fluid distribution and measurements of acoustic-wave velocities during flooding experiments. Using a specially developed acoustic sample holder that combines high pressure capacity with good transparency for X-rays, it becomes possible to investigate relationships between velocity and fluid saturation at reservoir stress levels. High-resolution 3D images can be constructed from thin slices of cross-sectional computer-tomography scans (CT scans) covering the entire rock-core volume, and from imaging the distribution of fluid at different saturation levels. The X-ray imaging clearly adds a new dimension to rock-physics measurements; it can be used in the explanation of variations in measured velocities from core-scale heterogeneities. Computer tomography gives a detailed visualization of density regimes in reservoir rocks within a core. This allows an examination of the interior of core samples, revealing inhomogeneities, porosity and fluid distribution. This mapping will not only lead to an explanation of acousticvelocity measurements; it may also contribute to an increased understanding of the fluid-flow process and gas/liquid mixing mechanisms in rock. Immiscible and miscible flow in core plugs can be mapped simultaneously with acoustic measurements. The effects of core heterogeneity and experimentally introduced effects can be separated, to clarify the validity of measured velocity relationships.

No abstract