An rf photocathode electron gun is used as an electron source for ultrafast time-resolved pump-probe electron diffraction. We observed single-shot diffraction patterns from a 160 nm Al foil using the 5.4 MeV electron beam from the Gun Test Facility at the Stanford Linear Accelerator. Excellent agreement with simulations suggests that single-shot diffraction experiments with a time resolution approaching 100 fs are possible. SLAC-PUB-12162 Submitted to Applied Physics Letters 2Our understanding about dynamical processes in chemistry, materials science and biology on the picosecond and sub-picosecond time scale stems almost exclusively from time-resolved spectroscopy. Structural changes, on atomic length scales, can only be inferred indirectly from the analysis of spectra. Both x-ray and electron diffraction share the goal of 'imaging' molecular structures with a time resolution that captures the motions as systems evolve, whether they be solids, liquids or gases. Lab scale experiments in both electron diffraction 1,2 and x-ray scattering 3 have produced impressive results. Recently, in anticipation of the construction of the Linac Coherent Light Source (LCLS) at the Stanford Linear Accelerator Center (SLAC), an experiment using the electron bunch from the SLAC Linac to produce spontaneous undulator radiation 4 has shown the possibilities for ultrafast x-ray scattering from condensed systems with 100 fs time resolution. 5 This has encouraged us to approach ultrafast electron diffraction (UED) using experimental techniques based on electron sources developed for particle accelerators, with the aim of obtaining single-shot diffraction patterns on a 100 fs time scale.Electron diffraction is complementary to x-ray scattering, but features much larger cross sections that allow the study of surface phenomena, the bulk structures of thin foils and membranes, as well as molecular structures of gas phase samples. 6 As with linac based x-ray sources there has been significant development of electron sources for UED based on the use of photocathodes. 7 Unfortunately, the space-charge interactions of the electrons within a pulse, and the initial kinetic energy distribution with which the electrons are generated, have made it difficult to obtain pulses much shorter than 1 ps 8,9,10 ,in 'conventional' UED experiments using ≈30 keV electron beams. To improve the time resolution one could use fewer electrons per pulse, but that requires longer data acquisition times to obtain the necessary signal-to-noise ratio. 11 Alternatively, it is possible to increase the electric field inside the electron gun, while reducing the flight distance between the gun and the target. 12 Both tend to reduce the time of flight of the electron pulse, thereby giving the electron pulse less time to spread. Even so, this 3 approach is limited because the maximum DC and pulsed electric fields are 12 MV/m and 25 MV/m, respectively. 13,14 In the present work we take a fresh approach to ultrafast time-resolved pump-probe diffraction by using MeV electron be...

Purpose: MRI guided radiotherapy is a rapidly growing field; however, current electron accelerators are not designed to operate in the magnetic fringe fields of MRI scanners. As such, current MRI-Linac systems require magnetic shielding, which can degrade MR image quality and limit system flexibility. The purpose of this work was to develop and test a novel medical electron accelerator concept which is inherently robust to operation within magnetic fields for in-line MRI-Linac systems. Methods: Computational simulations were utilized to model the accelerator, including the thermionic emission process, the electromagnetic fields within the accelerating structure, and resulting particle trajectories through these fields. The spatial and energy characteristics of the electron beam were quantified at the accelerator target and compared to published data for conventional accelerators. The model was then coupled to the fields from a simulated 1 T superconducting magnet and solved for cathode to isocenter distances between 1.0 and 2.4 m; the impact on the electron beam was quantified. Results: For the zero field solution, the average current at the target was 146.3 mA, with a median energy of 5.8 MeV (interquartile spread of 0.1 MeV), and a spot size diameter of 1.5 mm full-widthtenth-maximum. Such an electron beam is suitable for therapy, comparing favorably to published data for conventional systems. The simulated accelerator showed increased robustness to operation in in-line magnetic fields, with a maximum current loss of 3% compared to 85% for a conventional system in the same magnetic fields. Conclusions: Computational simulations suggest that replacing conventional DC electron sources with a RF based source could be used to develop medical electron accelerators which are robust to operation in in-line magnetic fields. This would enable the development of MRI-Linac systems with no magnetic shielding around the Linac and reduce the requirements for optimization of magnetic fringe field, simplify design of the high-field magnet, and increase system flexibility. C 2016 American Association of Physicists in Medicine. [http://dx

No abstract