The International Axion Observatory (IAXO) will be a forth generation axion helioscope. As its primary physics goal, IAXO will look for axions or axion-like particles (ALPs) originating in the Sun via the Primakoff conversion of the solar plasma photons. In terms of signalto-noise ratio, IAXO will be about 4-5 orders of magnitude more sensitive than CAST, currently the most powerful axion helioscope, reaching sensitivity to axion-photon couplings down to a few ×10 −12 GeV −1 and thus probing a large fraction of the currently unexplored axion and ALP parameter space. IAXO will also be sensitive to solar axions produced by mechanisms mediated by the axion-electron coupling g ae with sensitivity −for the first time− to values of g ae not previously excluded by astrophysics. With several other possible physics cases, IAXO has the potential to serve as a multi-purpose facility for generic axion and ALP research in the next decade. In this paper we present the conceptual design of IAXO, which follows the layout of an enhanced axion helioscope, based on a purpose-built 20m-long 8-coils toroidal superconducting magnet. All the eight 60cm-diameter magnet bores are equipped with focusing x-ray optics, able to focus the signal photons into ∼ 0.2 cm 2 spots that are imaged by ultra-low-background Micromegas x-ray detectors. The magnet is built into a structure with elevation and azimuth drives that will allow for solar tracking for ∼12 h each day.

Recent determinations of cosmological parameters point to a flat Universe, whose total energy density is composed of about two-thirds vacuum energy and one-third matter. Ordinary baryonic matter is relegated to a small fraction of the latter, within which the luminous part is an order of magnitude smaller yet. Particle dark matter, i.e., one or more relic particle species from the big bang, is thus strongly suggested as the dominant component of matter in the Universe. The axion, a hypothetical elementary pseudoscalar arising from the Peccei-Quinn solution to the strong-CP problem, is a well-motivated candidate. If the axion exists, it must be extremely light, in the mass range of 10 Ϫ6-10 Ϫ3 eV, and possess extraordinarily feeble couplings to matter and radiation. Nevertheless, as proposed by Sikivie in 1983, the axion's two-photon coupling lends itself to a feasible search strategy with currently available technology. In this scheme, axions resonantly convert to single microwave photons by a Primakoff interaction, in a tunable microwave cavity permeated by a strong magnetic field. Present experiments utilizing heterostructure transistor microwave amplifiers have achieved total system noise temperatures of ϳ3 K and represent the world's quietest spectral radio receivers. Exclusion regions have already been published well into the band of realistic axion model couplings, within the lowest decade of mass range. Recent breakthroughs in the development of near-quantum-limited superconducting quantum interference device amplifiers should reduce the system noise temperature to ϳ100 mK or less. Ongoing research into using Rydberg-atom single-quantum detectors as the detector in a microwave cavity experiment could further reduce the effective noise temperature. In parallel with improvements in amplifier technology, promising concepts for higher-frequency cavity resonators are being explored to open up the higher decades in mass range. Definitive experiments to find or exclude the axion may therefore be at hand in the next few years. As the microwave cavity technique measures the total energy of the axion, a positive discovery could well reveal fine structure of the signal due to flows of nonthermalized axions. Manifesting diurnal and sidereal modulation, such detailed features would contain a wealth of information about the history, structure, and dynamics of our Milky Way galaxy. CONTENTS I. Overview 778 II. Review of Axion Theory 779 A. Particle physics and the axion 779 B. Constraints from laboratory searches and astrophysics 780 C. Axions and cosmology 781 D. Phase-space structure of halo dark-matter axions 783 III. The Sikivie Microwave Cavity Experiment 783 A. Principles and techniques 783 B. First-generation experiments 784 1. The Rochester-Brookhaven-Fermilab experiment 784 2. The University of Florida experiment 785 C. Second-generation experiments IV. The U.S. Large-Scale Search A. Hardware 1. Cavity and tuning rods 2. The cavity mode structure and form factor B. Balanced heterostructure field-effect transisto...

No abstract

Parametric photon creation via the dynamical Casimir effect (DCE) is evaluated numerically, in a three-dimensional rectangular resonant cavity bisected by a semiconductor diaphragm (SD), which is irradiated by a pulsed laser with frequency of GHz order. The aim of this paper is to determine some of the optimum conditions required to detect DCE photons relevant to a novel experimental detection system. We expand upon the thin plasma sheet model [Crocce et al., Phys. Rev. A 70 033811 (2004)] to estimate the number of photons for both TE and TM modes at any given SD position. Numerical calculations are performed considering up to 51 inter-mode couplings by varying the SD location, driving period and laser power without any perturbations. It is found that the number of photons created for TE modes strongly depends on SD position, where the strongest enhancement occurs at the midpoint (not near the cavity wall); while TM modes have weak dependence on SD position. Another important finding is the fact that significant photon production for TM111 modes still takes place at the midpoint even for a low laser power of 0.01 µJ/pulse, although the number of TE111 photons decreases almost proportionately with laser power. We also find a relatively wide tuning range for both TE and TM modes that is correlated with the frequency variation of the instantaneous mode functions caused by the interaction between the cavity photons and conduction electrons in the SD excited by a pulsed laser.

A quantum theoretical treatment of the interactions of cosmic axions with Rydberg atoms in resonant cavities via the Primakoff process is developed, by taking into account the finite temperature and the dissipation due to the finite damping time of the cavities. The time evolution of the number of the excited Rydberg atoms, evaluated numerically based on the theoretical formulations, enables us to obtain the detection efficiency of the axion-converted photons with a good signal-to-noise ratio. The optimum experimental setup to search for dark matter axions with Rydberg atoms is presented.PACS number͑s͒: 95.35.ϩd, 14.80.Mz, 32.80.Rm