No abstract

No abstract

One of the most important elements in the development of compressive strength is concrete curing, and a large temperature differential during curing may decrease strength. This exudation is caused by microcracks in the concrete caused by the continuous temperature fluctuation. By minimizing autogenous shrinkage, internal curing has become popular for reducing the danger of early-age cracking in high-performance concrete (HPC). The efficacy of internal wet curing provided by fine Attapulgite aggregate is investigated in this research. On three different HPCs, both with and without internal curing materials, the development of observed mechanical properties is investigated. Two different amounts of normal weight fine aggregate were replaced with attapulgite fine aggregates. Internal cure has been found to benefit from attapulgite fine aggregates. It has been found that adding 20% Attapulgite fine aggregates to HPC enhances the material’s characteristics, resulting in low internal stress and a significant increase in compressive strength. It should be noted that, unlike certain conventional lightweight aggregates, the different amounts of Attapulgite fine aggregates added at various ages have shown no decrease in compressive strength.

No abstract

Internal curing has long been utilized to decrease self-shrinkage and consequently the increased danger of concrete cracking prematurely. The measured mechanical characteristics of concrete were studied in five mixes, both with and without internal curing. Two of these mixtures have a 10% replacement rate, with one using ceramic and the other Attapulgite, while the other two have a 20% replacement, with one using ceramic and the other using Attapulgite, and the fifth is a reference mixture with no replacement for comparative reasons. With an increase of 27.93%, the ceramic combination with a 20% replacement rate is judged to have the highest compressive resistance, followed by the Attapulgite mixture with a 20% replacement rate with an increase of 34.2%. The results showed that the ceramic and Attapulgite internal curing purposes were highly effective, especially with a 20% replacement. The use of crushed ceramics and attapulgite as internal curing materials improves the characteristics of concrete.