This article reviews the design and evaluation of different DC-DC converter topologies for Battery Electric Vehicles (BEVs) and Plug-in Hybrid Electric Vehicles (PHEVs). The design and evaluation of these converter topologies are presented, analyzed and compared in terms of output power, component count, switching frequency, electromagnetic interference (EMI), losses, effectiveness, reliability and cost. This paper also evaluates the architecture, merits and demerits of converter topologies (AC-DC and DC-DC) for Fast Charging Stations (FCHARs). On the basis of this analysis, it has found that the Multidevice Interleaved DC-DC Bidirectional Converter (MDIBC) is the most suitable topology for high-power BEVs and PHEVs (> 10kW), thanks to its low input current ripples, low output voltage ripples, low electromagnetic interference, bidirectionality, high efficiency and high reliability. In contrast, for low-power electric vehicles (<10 kW), it is tough to recommend a single candidate that is the best in all possible aspects. However, the Sinusoidal Amplitude Converter, the Z-Source DC-DC converter and the boost DC-DC converter with resonant circuit are more suitable for low-power BEVs and PHEVs because of their soft switching, noise-free operation, low switching loss and high efficiency. Finally, this paper explores the opportunity of using wide band gap semiconductors (WBGSs) in DC-DC converters for BEVs, PHEVs and converters for FCHARs. Specifically, the future roadmap of research for WBGSs, modeling of emerging topologies and design techniques of the control system for BEV and PHEV powertrains are also presented in detail, which will certainly help researchers and solution engineers of automotive industries to select the suitable converter topology to achieve the growth of projected power density.
Automotive Original Equipment Manufacturers (OEMs) require varying levels of functionalities and model details at different phases of the electric vehicles (EV) development process, with a trade-off between accuracy and execution time. This article proposes a scalable modelling approach depending on the multi-objective targets between model functionalities, accuracy and execution time. In this article, four different fidelity levels of modelling approaches are described based on the model functionalities, accuracy and execution time. The highest error observed between the low fidelity (LoFi) map-based model and the high fidelity (HiFi) physics-based model is 5.04%; while, the simulation time of the LoFi model is ~10 4 times faster than corresponding one of the HiFi model. A detailed comparison of all characteristics between multi-fidelity models is demonstrated in this paper. Furthermore, a dSPACE SCALEXIO Hardwarein-the-Loop (HiL) testbench, equipped with a minimal latency of 18μsec, is used for real-time (RT) model implementation of the EV's HV DC/DC converter. The performance of the entire HiL setup is compared with the Model-in-the-Loop (MiL) setup and the highest RMSE is limited to 0.54 among the HiL and MiL results. Moreover, the accuracy (95.7%) of the passive component loss estimation is verified through the Finite Element Method (FEM) software model. Finally, the experimental results of a full-scale 30-kW SiC DC/DC converter prototype are presented to validate the accuracy and correlation between multi-fidelity models. It has been observed that the efficiency deviation between the hardware prototype and multi-fidelity models is less than 1.25% at full load. Furthermore, the SiC Interleaved Bidirectional Converter (IBC) prototype achieves a high efficiency of 98.4% at rated load condition. INDEX TERMS DC/DC interleaved converter, EV, efficiency, electro-thermal modelling, multi-fidelity models, optimization, scalable modelling, Hardware-in-the-loop, and wide-bandgap technology.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2025 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.