No abstract

No abstract

No abstract

This study aims to determine the most convenient calcination temperature and calcination duration of wastestabilized Adobe (AB) to produce a new alkali-activated binder. Waste-stabilized Adobe mainly consists of soil, CaCO 3 as a stabilizer, and straw (for strengthening). The availability of raw materials for making Adobe presents the waste-stabilized Adobe as a potential product for a new alkali-activated binder. Waste-stabilized Adobe collected from an abandoned damaged building in the village of Inonu in Northern Cyprus, ground and calcined at the following temperatures: 450, 550, 650, 750, 850, and 950°C. The calcination at each temperature was held for different durations 1, 3, 5, and 7 h. Raw and calcined waste stabilized Adobe structures were investigated using XRF, TGA-DTA, XRD, FTIR, and SEM. Considering technical and environmental views related to energy consumption, waste stabilized Adobe calcined at 750°C for 1 h presented the most promising results regarding the production of a new precursor for alkali-activated binder. This study also presents the effect of ground granulated blast furnace slag (GGBFS) usage on the fresh and hardened properties of optimum calcined AB-based alkali-activated pastes cured at room temperature. GGBFS was used to partially replace AB to form a binary composite raw material system and seven experimental groups were designed according to replacement levels of 0%, 5%, 10%, 15%, 20%, 25% and 30% (by mass). Alkali-activated high volume waste-stabilized Adobe-slag pastes prepared using Na 2 SiO 3 -to-NaOH ratio of 2 and 12 M concentration of Sodium Hydroxide. The fresh property as flowability and the hardened property as the compressive strength of the alkali-activated pastes with different GGBFS contents were investigated. The results indicated that the incorporation of GGBFS increased the flowability of fresh alkali-activated pastes. A 28-day compressive strength of 43.75 MPa can be obtained by a 30% replacement level of GGBFS.