In the Printing Industry, printing inks, varnishes, lacquers, moistening solutions and washing solvents (ethanol, methyl acetate, ethyl acetate, isopropanol, n-propanol, hexane, benzene, toluene, xylene, isopropyl acetate, propyl acetate, dimethyl ketone, glycols and glycol ethers) contain volatile organic compounds (VOCs) and air pollutants (HAPs). Especially solvent based inks used for flexo, gravure and screen printing, offset printing dampening solutions and cleaning solvents contain high concentration of VOC. These organic compounds evaporate during the production process or contribute to the photochemical reaction. VOCs and HAPs, together with sunlight and nitrogen oxides, cause photochemical smoke, air particles and ground level ozone emission in the atmosphere. The VOCs and heavy metals can lead to soil and even water pollution when left in landfill. The amount of solvent retained by flexo, gravure and screen-printed products is 3-4% of total ink solvent used. The solvent in the printed ink content, except for the one held by the printed material evaporates in its own environment after the printing process. Most of these solvents and organic compounds used in printing environment contain at least one carbon and hydrogen atom and have negative effects on health and environment.In this study, the environmental impacts and risks of inks and solvents used in the printing industry have been evaluated. Measures to be taken to reduce and manage these environmental effects and risks have been addressed and recommendations have been made.

Accelerating the transition to post-print processes needed in the printing industry and shortening the time the product's release time is closely related to the drying time of the ink film. The drying of fluid ink on the surface of the print substrate, transforming from liquid to solid occurs physically and chemically in several ways. Drying systems can be functional alone on the surface of the printing substrate for an ink film or depending on the chemical content of the ink and the properties of the printing substrate, drying can be achieved at the same time with more than one system.Recently, in order to reduce climate, environmental and health impacts and with the development of technology, significant changes are also being experienced in the printing industry and preferences are changing. In this study, more environmentally friendly LED UV and microwave drying systems that save time and energy together with existing basic drying systems such as absorption, evaporation, oxidation-polymerization and conventional UV used in the printing industry are examined. The advantages of different drying systems to the printing industry, preferred drying systems and new studies on this issue have been evaluated.

Purpose The surface energy of the printing material can be increased to desired levels with different chemicals or methods. However, the important thing is that the surface properties of printing material are not affected negatively. In this way the aim of this paper provide that the surface properties of matte and glossy coated paper is improved by the argon containing atmospheric pressure plasma device because the plasma treatment method does not occur surface damaging on the papers. Design/methodology/approach In experimental studies, test samples cut from 160 mm × 30 mm in size from 115 g/m2 gloss- and matt-coated papers were used. The plasma treatments of paper samples were carried out with an argon containing atmospheric pressure plasma device of laboratory scale that produces plasma of the corona discharge type at radio frequency. The optimized plasma parameters were at a frequency of 20 kHz and plasma power 200 W. A copper electrode of length 12 cm and diameter 2.5 mm was placed in the centre of the nozzle. Findings Research findings showed that the surface energies of the papers increased with the increase in plasma application time. While the contact angle of the untreated glossy paper is 82.2, 8 second plasma applied G3 sample showed 54 contact angle value. Similarly, the contact angle of the base paper of matt coated is 91.1, while M3 is reduced to 60.4 contact angles by the increasing plasma time. Originality/value Plasma treatment has shown that no chemical coating is needed to increase the wettability of the paper surface by reducing the contact angle between the paper and the water droplet. In addition, the surface energies of all papers treated by argon gas containing atmospheric pressure plasma, increased. Plasma treatment provides to improve both the wettability of the paper and the adhesion property required for the ink, with an environmentally friendly approach.

When consumers examine water containers, different companies can see products that have the same shape and are labeled with labels that are similar to each other. In such a case, it is inevitable that consumers outside of a certain brand preference, randomly select one from products that are visually similar. Every company wants to be known and preferred among the customers. The decision mechanism of the consumer in competitive market conditions in which a large number of products of the same category are offered; as well as the quality of the product, the quality of the label that surrounds the product. As in other sectors, packaged aquaculture has a multitude of businesses with regional or national level struggling to sell what they produce. In a world where all kinds of opportunities are evaluated in the preference of the customer, the importance of packaging and ethics is not shown. The resemblance of aquatic labels may not have caught the attention of the consumer. But when you look at the graphic designer from the eye, it seems to be an unusual situation. The similarity in the design of the aquaculture labels was analyzed in terms of graphic design.Study; The visual similarities of the labels were analyzed from the technical point of view and evaluated in the context of the conceptual information formed from the past. It is not possible to have definite expressions such as industrial product analysis in evaluating the graphical products that need to be known. It should be accepted that assessments vary according to personal savings and styles.Water companies operating in our country were randomly selected and evaluated. The number of firms evaluated corresponds to the estimated half of the total number.