Sustainable access to safe drinking water remains a global problem as more people in the world still consume water from unimproved sources. This study was carried out to evaluate the quality of 12 different water sources and 2 treated water used by a peri-urban town in the Southwest region of Nigeria to assess their suitability for drinking and domestic use. Water quality parameters studied include pH, temperature, acidity, total alkalinity, chloride content and total CO2. A Flame Atomic Absorption spectrophotometer was used to determine the concentrations of Ca, Mg, Cu, Cr, and Pb in the water samples. The total coliform was determined using the most probable number technique while a qualitative method was used to detect the presence of faecal coliform and E. coli in the water samples. All the physicochemical water quality parameters complied with regulatory standards. Similarly, most of the heavy metals also complied except for some sites. Faecal coliform and E. coli tested positive for all the samples except one of the tap water sample. Majority of the water samples (86%) were rated as excellent based on the physicochemical parameters. One sample each was rated as having poor and good water quality, respectively. All the samples tested positive for faecal coliform bacteria and E. coli except one (treated water). It is recommended that Microbial water quality parameters be included in all Water Quality Index (WQI) analyses in order to give the true status of the quality of a water resource.

ABSTRACT:A comparison has been made of the efficiency of heavy metal ion adsorption from synthetic wastewaters by charcoal prepared locally from the burnt remnants of plantain peel with more conventional adsorbents such as industrial activated wood charcoal, technical charcoal animal powder and Amberlite resin. Thus, mixed standard solutions (100 mg/ᐉ) of copper and lead ions adjusted by buffer solutions to pH values of 5, 7 and 9, respectively, were allowed to flow through adsorbent columns which were 10, 20, 30, 40 and 50 cm in length. The concentrations of the heavy metal ions in the mixed standard solutions were determined before and after contact with the adsorbents via atomic absorption spectrophotometry (AAS). The adsorption capacities of the various adsorbents based on the overall percentage removal of Cu 2+ ions at pH 9 employing a column of 50 cm length were in the order: Amberlite resin (98.89 ± 7.59%) > plantain peel charcoal (98.56 ± 6.72%) > technical charcoal animal powder (96.87 ± 5.78%) > activated wood charcoal (93.64 ± 7.29%). The corresponding order for Pb 2+ ions at a pH value of 7 employing a column of 50 cm length was: Amberlite resin (99.98 ± 7.53%) > plantain peel charcoal (98.37 ± 7.95%) > technical charcoal animal powder (97.91 ± 6.83%) > activated wood charcoal (96.39 ± 7.06%).

No abstract