Fishing vessels have been causing more than 70% of marine casualty in Korea. As a view of the occurring number of marine casualty, it is obvious for fishing vessel to account for the absolute high portion of that in comparison with the non-fishing vessels. That is a natural outcome because fishing vessels have occupied more than 90% of all registered Korean vessels. If we consider it not occurring number, but occurring ratio, we could find out that fishing vessels accounted for 5 times lower than non-fishing vessels in marine casualties. Nevertheless, fishing vessels have not immunity from responsibility for marine casualties at all, because the tendency of it in fishing vessel has been dominating the whole marine casualties in Korea. So for reduction of them, it is indispensable to decrease the casualties of fishing vessel. In this study, the authors tried to carry out many items of them to compare the occurring number with the occurring ratio, and dealt with the casualties of collision and machine damage in detail, because those have not only been occurring most frequently in casualties in Korea, but also led to the death and injury of lives. To reduce the collision and the machine damage, the operator have to keep the watch more strictly and check and keep the machine in good order. And it is necessary for the operator to take more education and training intended to decrease those systematically and continuously, especially for the crews of fishing vessels.

No abstract

The research vessel NARA equipped with an azimuth thruster system was built in 2015. There are few vessels with this propulsion system in Korea. This vessel has two modes such as the normal for maneuvering and the power for investigation, and the other two modes as one axis and two axes on the operating. This type of vessels does not seem to have a clear grasp of the maneuvering character in comparison with the vessel with a conventional propulsion system. So the authors carried out the sea test for the turning, the zigzag and the inclination, and the results are as follows. In turning test, the case of using the two axes mode is much better than the case of using the one axis mode for the elements of turning, such as advance, transfer, tactical diameter and final diameter, but turning hard over the rudder in full speed is very vulnerable to capsize in both modes. In zigzag test, the yaw quicking responsibility index,  is very large excessively, which means a bad counter maneuvering ability, so an operator has to keep in mind that in turning operation. If necessary to avoid collision at head on situation, it may be a more effective method to use the crash astern stop than the turning according to the conditions and circumstances for the shortest stopping distance is very short.

The purpose of this paper is to examine the roll damping characteristics by bilge keels on the fishing vessel. Unlike other degree of freedom motions, roll motion is highly nonlinear. However the quantitative evaluation of roll damping combined with waves is very important for the fishing vessel. To reduce roll motion, roll motion stabilizers such as a bilge keel is used due to easy made and cheap cost rather than anti-rolling tank and fin-stabilizer. Authors paid attention to the shape of bilge keel and waves to grasp the roll damping for the fishing vessel and studied about the difference of tendencies of roll angle following the shapes of bilge keel. The model ship was the offshore large purse seiner and four types of bilge keel were used. The data from the experiments were provided and analyzed to investigate the rolling characteristics of the model ship being affected by the wave height, wave period and bilge keel shape. The results of the study showed that three types of the bilge keel have little effective, but only one has an effect on the roll damping. So bilge keel shape and its attachment method need to be a future study for the practical use in fishing vessel.

Marine casualties originated from fishing vessel occupied about 70% of the whole marine casualties in Korea from 2001 to 2010, this ratio was not much changed as it was before. Therefore a pragmatic counterplan to decrease of casualties in fishing vessel is indispensable for reduction of the nationwide marine casualties. But since the casualties occurred by fishing vessel may have a different causes and counterplan according to the operating type of it, in this paper, fishing vessels classified into 12 types by operating method and inspected the causes and counterplan for that. The operating type of fishing vessel occurred the specific casualties more were jig boat in collisions and fire explosion, trap fishing boat, mixed fishing boats and inshore gill netter in collisions, stow netter in machinery damages and capsizing, offshore gill netter in machinery damages, fish carrier in collisions.It must be emphasized that the higher ranked types of vessels, especially jig boat have to take special care to the approaching vessels under way, trap fishing boat to rear look out and mixed fishing boat must keep on safety speed and be taken an education for advance the skill of operating radar as well. For all 12 types of fishing vessel, it is necessary for an operator to make strict precaution on the other vessel under way systematically and keep the regulation for preventing collisions, and for an engineer on watch to make a check the electricity and the engines periodically for reduction the fire explosion and machinery damages.