No abstract

The purpose of this study is to investigate the effects of slurry pH on the adhesion and removal of silica and ceria abrasive particles on the poly Si, TEOS, SiN and SAC (self aligned memory cell contact) and STI (shallow trench isolation) patterned wafer surfaces. The adhesion force of silica and ceria particles were theoretically and experimentally investigated in STI and poly Si CMP process. A stronger adhesion force was observed for silica particles on the poly Si wafer in acidic rather than in alkaline solutions. The adhesion force of ceria particle was lower than that of silica in investigated pH ranges. STI patterned wafer showed lower adhesion force than SAC patterned wafer. Lower adhesion force between particles and surface resulted in a lower level of particle contamination.

The hydrophobicity of poly Si is reported to introduce different polishing behavior with careful control of post CMP cleaning process. The purpose of this study was to investigate the effect of poly Si wettability on its CMP behavior. The adhesion force of polymeric particle on the poly Si wafer surfaces was measured in the KOH solution (pH 11) as a function of solution A concentration. Adhesion force decreased and saturated as a function of concentration of solution A. The change of surface wettability affects not only the polishing rates but also the level of contamination on wafer because the interactions between particles and substrates are dependent on the wettability of the surface. Also, hydrophobic poly Si surfaces attracted much more pad particles with water marks than hydrophilic

No abstract