Recent developments in the fields of smartphones and wireless communication technologies such as beacons, Wi-Fi, and ultrawideband have made it possible to realize indoor positioning system (IPS) with a few meters of accuracy. In this paper, an improvement over traditional fingerprinting localization is proposed by combining it with weighted centroid localization (WCL). The proposed localization method reduces the total number of fingerprint reference points over the localization space, thus minimizing both the time required for reading radio frequency signals and the number of reference points needed during the fingerprinting learning process, which eventually makes the process less time-consuming. The proposed positioning has two major steps of operation. In the first step, we have realized fingerprinting that utilizes lightly populated reference points (RPs) and WCL individually. Using the location estimated at the first step, WCL is run again for the final location estimation. The proposed localization technique reduces the number of required fingerprint RPs by more than 40% compared to normal fingerprinting localization method with a similar localization estimation error.

In recent times, social and commercial interests in location-based services (LBS) are significantly increasing due to the rise in smart devices and technologies. The global navigation satellite systems (GNSS) have long been employed for LBS to navigate and determine accurate and reliable location information in outdoor environments. However, the GNSS signals are too weak to penetrate buildings and unable to provide reliable indoor LBS. Hence, GNSS’s incompetence in the indoor environment invites extensive research and development of an indoor positioning system (IPS). Various technologies and techniques have been studied for IPS development. This paper provides an overview of the available smartphone-based indoor localization solutions that rely on radio frequency technologies. As fingerprinting localization is mostly accepted for IPS development owing to its good localization accuracy, we discuss fingerprinting localization in detail. In particular, our analysis is more focused on practical IPS that are realized using a smartphone and Wi-Fi/Bluetooth Low Energy (BLE) as a signal source. Furthermore, we elaborate on the challenges of practical IPS, the available solutions and comprehensive performance comparison, and present some future trends in IPS development.

Nowadays, research and development of various indoor positioning systems (IPS) have been increasing owing to flourishing social and commercial interest in location-based services (LBSs). Among LBS technologies, we used the Bluetooth low energy beacon in our system, which consumes less energy and is embedded in many current smartphones and tablets. In particular, the fingerprinting method has become a prime choice in the design of IPS owing to its good location estimation and the fact that a line-of-sight from access points is not required. We propose an improved two-step fingerprinting localization using multiple fingerprint features to enhance the localization accuracy. The proposed system uses a propagation model to convert RSS of beacons to distance and estimate the weighted centroid (WC) of nearby beacons. The estimated WCs along with signal strength and rank of the nearby beacons are stored in the server database for localization instead of RSS from all the deployed beacons. First, the proposed system makes use of diverse fingerprinting features to increase localization accuracy that also reduces both the physical size of the database and the amount of data communication with the server in the execution phase; second, affinity propagation clustering minimizes the searching space of RPs and reduces the computational cost; third, exponential averaging is introduced to smooth the noisy RSS. The experimental results obtained by real field deployment show that the proposed method significantly improves the performance of the positioning system in both the positioning accuracy and radio-map database size. INDEX TERMS Affinity propagation clustering, BLE, Exponential averaging, RSS, Weighted centroid.

No abstract

A long-range wide area network (LoRaWAN) is one of the leading communication technologies for Internet of Things (IoT) applications. In order to fulfill the IoT-enabled application requirements, LoRaWAN employs an adaptive data rate (ADR) mechanism at both the end device (ED) and the network server (NS). NS-managed ADR aims to offer a reliable and battery-efficient resource to EDs by managing the spreading factor (SF) and transmit power (TP). However, such management is severely affected by the lack of agility in adapting to the variable channel conditions. Thus, several hours or even days may be required to converge at a level of stable and energy-efficient communication. Therefore, we propose two NS-managed ADRs, a Gaussian filter-based ADR (G-ADR) and an exponential moving average-based ADR (EMA-ADR). Both of the proposed schemes operate as a low-pass filter to resist rapid changes in the signal-to-noise ratio of received packets at the NS. The proposed methods aim to allocate the best SF and TP to both static and mobile EDs by seeking to reduce the convergence period in the confirmed mode of LoRaWAN. Based on the simulation results, we show that the G-ADR and EMA-ADR schemes reduce the convergence period in a static scenario by 16% and 68%, and in a mobility scenario by 17% and 81%, respectively, as compared to typical ADR. Moreover, we show that the proposed schemes are successful in reducing the energy consumption and enhancing the packet success ratio.