No abstract

With CB-2, acute and long-term PV isolation rates were higher despite shorter ablations, faster balloon cooling, and longer thaw times, with similar AE rates and freedom from AF.

Like all biofluid-contacting medical devices, intranasal splints are highly prone to bacterial adhesion and clot formation. Despite their widespread use and the numerous complications associated with infected splints, limited success has been achieved in advancing their safety and surface biocompatibility, and, to date, no surface-coating strategy has been proposed to simultaneously enhance the antithrombogenicity and bacterial repellency of intranasal splints. Herein, we report an efficient, highly stable lubricant-infused coating for intranasal splints to render their surfaces antithrombogenic and repellent toward bacterial cells. Lubricant-infused intranasal splints were prepared by creating superhydrophobic polysiloxane nanofilament (PSnF) coatings using surface-initiated polymerization of n-propyltrichlorosilane (n-PTCS) and further infiltrating them with a silicone oil lubricant. Compared with commercially available intranasal splints, lubricant-infused, PSnF-coated splints significantly attenuated plasma and blood clot formation and prevented bacterial adhesion and biofilm formation for up to 7 days, the typical duration for which intranasal splints are kept. We further demonstrated that the performance of our engineered biointerface is independent of the underlying substrate and could be used to enhance the hemocompatibility and repellency properties of other medical implants such as medical-grade catheters.

This study reports for the first time the change in pullout force with angulation, showing a general pullout force decrease with increasing angle. With a larger number of samples than in previous studies, our results provide updated benchmark data that can be used for clinical discussions, computational and experimental studies, and future device design.

Medical device-associated infections are an ongoing problem. Once an implant is infected, bacteria create a complex community on the surface known as a biofilm, protecting the bacterial cells against antibiotics and the immune system. To prevent biofilm formation, several coatings have been engineered to hinder bacterial adhesion or viability. In recent years, liquid-infused surfaces (LISs) have been shown to be effective in repelling bacteria due to the presence of a tethered liquid interface. However, local lubricant loss or temporary local displacement can lead to bacteria penetrating the lubrication layer, which can then attach to the surface, proliferate, and form a biofilm. Biofilm formation on biomedical devices can subsequently disrupt the chemistry tethering the slippery liquid interface, causing the LIS coating to fail completely. To address this concern, we developed a “fail-proof” multifunctional coating through the combination of a LIS with tethered antibiotics. The coatings were tested on a medical-grade stainless steel using contact angle, sliding angle, and Fourier transform infrared spectroscopy. The results confirm the presence of antibiotics while maintaining a stable and slippery liquid interface. The antibiotic liquid-infused surface significantly reduced biofilm formation (97% reduction compared to the control) and was tested against two strains of Staphylococcus aureus, including a methicillin-resistant strain. We also demonstrated that antibiotics remain active and reduce bacteria proliferation after subsequent coating modifications. This multifunctional approach can be applied to other biomaterials and provide not only a fail-safe but a fail-proof strategy for preventing bacteria-associated infections.