A novel air-stable sodium iron hexacyanoferrate (R-Na1.92Fe[Fe(CN)6]) with rhombohedral structure is demonstrated to be a scalable, low-cost cathode material for sodium-ion batteries exhibiting high capacity, long cycle life, and good rate capability. The cycling mechanism of the iron redox is clarified and understood through synchrotron-based soft X-ray absorption spectroscopy, which also reveals the correlation between the physical properties and the cell performance of this novel material. More importantly, successful preparation of a dehydrated iron hexacyanoferrate with high sodium-ion concentration enables the fabrication of a discharged sodium-ion battery with a non-sodium metal anode, and the manufacturing feasibility of low cost sodium-ion batteries with existing lithium-ion battery infrastructures has been tested.

By modifying the surface of nanoporous alumina membranes using mixtures of a photochromic spiropyran and hydrophobic molecules, it is possible to control the admission of water into the membrane using light. When the spiropyran is in the thermally stable, relatively hydrophobic closed form, the membrane is not wet by an aqueous solution. Upon exposure to UV light, the spiropyran photoisomerizes to the more polar merocyanine form, allowing water to enter the pores and cross the membrane. Thus, the photosensitive membrane acts as a burst valve, allowing the transport of water and ions across the membrane. If the aqueous solution contains ions, then the membrane acts as an electrical switch; photoisomerization leads to a two-order-of-magnitude increase in ionic conductance, allowing a current to flow across the membrane. Exposure to visible light causes photoisomerization of the merocyanine back to the closed, spiro form, but dewetting of the membrane does not occur spontaneously, due to a high activation barrier.

This report provides an overview of development activities that enable the scale‐up and thereby a pathway toward the commercialization of sodium‐ion battery technologies for the energy storage market. The electrochemical performance of active materials and full cell performance of batteries developed by two startup companies, Novasis Energies, Inc. and Faradion Limited, are discussed in detail. Both companies offer low‐cost sodium‐ion battery chemistries with uniquely developed active materials that afford high rate capability and cycling stability. Their technologies are highly scalable due to the implementation of abundant and predominantly nontoxic elements and the ability to utilize common battery fabrication and manufacturing equipment. Both companies utilize active materials that are cost competitive compared to low‐cost lithium‐ion battery materials while exhibiting very similar specific capacity. In addition, improved safety characteristics with respect to operation and transportation distinguish the described sodium‐ion batteries from their incumbent lithium‐ion counterparts. The featured technology is particularly attractive for large‐scale energy storage applications.

Na-ion batteries are emerging as one of the most promising energy storage technologies, particularly for grid-level applications. Among anode candidate materials, hard carbon is very attractive due to its high capacity and low cost. However, hard carbon anodes often suffer a low first-cycle Coulombic efficiency and fast capacity fading. In this study, we discover that doping graphene oxide into sucrose, the precursor for hard carbon, can effectively reduce the specific surface area of hard carbon to as low as 5.4 m(2)/g. We further reveal that such doping can effectively prevent foaming during caramelization of sucrose and extend the pyrolysis burnoff of sucrose caramel over a wider temperature range. The obtained low-surface-area hard carbon greatly improves the first-cycle Coulombic efficiency from 74% to 83% and delivers a very stable cyclic life with 95% of capacity retention after 200 cycles.