Due to the increasing use of engineered nanomaterials in consumer products, regulatory agencies and other research organizations have determined that the development of robust, reliable, and accurate methodologies to characterize nanoparticles in complex matrices is a top priority. Of particular interest are methods that can separate and determine the size of nanomaterials in samples that contain polydisperse and/or multimodal nanoparticle populations. Asymmetric-flow field flow fractionation (AF4) has shown promise for the separation of nanoparticles with wide size range distributions; however, low analyte recoveries and decreased membrane lifetimes, due to membrane fouling, have limited its application. Herein, we report straightforward strategies to minimize membrane fouling and improve nanoparticle recovery by functionalizing the surface of the nanoparticles, as well as that of the AF4 membranes. Gold nanoparticles (AuNP) were stabilized through functionalization with a phosphine molecule, whereas the surface of the membranes was coated with a negatively charged polystyrenesulfonate polymer. Improved nanoparticle separation, recoveries of 99.1 (±0.5) %, and a detection limit of 6 μg/kg were demonstrated by analyzing AuNP reference materials of different sizes (e.g., 10, 30, and 60 nm), obtained from the National Institute of Standards and Technology (NIST). Furthermore, the stability of the polymer coating and its specificity toward minimizing membrane fouling were demonstrated.

We report the development and optimization of a system consisting of capillary electrophoresis (CE) interfaced with inductively coupled plasma mass spectrometry (ICPMS) for rapid and high resolution speciation and characterization of metallic (e.g., gold, platinum, and palladium) nanoparticles in a dietary supplement. Multiple factors, including surfactant type and concentration, pH of running buffer, and applied voltage, were investigated to optimize the separation conditions. It was found that by using the anionic surfactant sodium dodecyl benzenesulfonate (SDBS) in the running buffer the separation resolution was significantly improved, allowing for easy distinction of adjacent size fractions in a gold nanoparticle mixture with very small size differences (e.g., 5, 15, 20, and 30 nm). The type and concentration of the surfactant was found to be critical in obtaining sufficient separation while applied voltage and pH values of the running buffers largely affected the elution times by varying the electroosmotic flow. Quantum dots were used as mobility markers to eliminate the run-to-run variation. The diameters of the nanoparticles followed a linear relationship with their relative electrophoretic mobility, and size information on unknown samples could be extrapolated from a standard curve. The accuracy and precision of this method was confirmed using 10 and 30 nm gold nanoparticle standard reference materials. Furthermore, the method was successfully applied to the analysis of commercially available metallic nanoparticle-based dietary supplements, as evidenced by good agreement between the particle sizes calculated by CE/ICPMS and transmission electron microscopy (TEM).

No abstract

No abstract

Nanomaterials are beginning to enter our daily lives through various consumer products as the result of technology commercialization. The development of methodologies to detect the presence of nanomaterials in consumer products is an essential element in understanding our exposure. In this study, we have developed methods for the separation and characterization of silicon dioxide (SiO2) and titanium dioxide (TiO2) nanostructures in dietary supplements marketed in products specifically targeted for women. A total of 12 commercial products claiming the inclusion of SiO2 and TiO2, but not making any claims regarding the particle size, were randomly selected for purchase through various retailers. To isolate nanostructures from these products, a simple methodology that combines acid digestion and centrifugation was utilized. Once isolated, the chemical composition, size, morphology, and crystal structure were characterized using mass spectroscopy, light scattering, electron microscopy, and X-ray diffraction techniques. SiO2 and TiO2 nanostructures were detected in 11 of 12 products using these methods. Many of the isolated nanoscale materials showed a high degree of aggregation; however, identified individual structures had at least one dimension below 100 nm. These robust methods can be used for routine monitoring of commercial products for nanoscale oxides of silica and titanium.