Pseudospin describes how waves are distributed between different "internal" degrees of freedom or microscopic states, such as polarizations, sublattices, or layers. Here, we experimentally demonstrate and explain wave dynamics in a photonic Lieb lattice, which hosts an integer pseudospin s=1 conical intersection. We study the most striking differences displayed by integer pseudospin states: pseudospin-dependent conical diffraction and the generation of higher charged optical vortices.

optical tunable Bragg gratings in lithium niobate fabricated by direct femtosecond laser writing. The hybrid design that consists of a circular type-II waveguide and a multiscan type-I Bragg grating exhibits low loss ordinary and extraordinary polarized guiding as well as narrowband reflections in the c-band of optical communications. High bandwidth tunability of more than a peak width and nearly preserved electro-optic coefficients of r(13) = 7.59 pm V(-1) and r(33) = 23.21 pm V(-1) are demonstrated.

Nonlinear photonic structures with a modulated second-order nonlinearity are used widely for quasi-phase-matched parametric processes. Creating three-dimensional (3D) nonlinear photonic structures is promising but still challenging, since standard poling methods are limited to two-dimensional structures. Light-induced quasi-phase matching (QPM) can overcome this issue by a depletion of the second-order nonlinearity with focused femtosecond laser pulses. We report, to the best of our knowledge, the first integration of a 3D QPM structure in the core of a lithium niobate waveguide applying light-induced fabrication. Depressed-cladding waveguides and embedded QPM structures are fabricated by femtosecond laser lithography. The 3D capability is exploited by splitting the QPM gratings in the waveguide core into two or four parts, respectively. These monolithic nonlinear waveguides feature parallel multi-wavelength frequency conversion. Finally, we demonstrate a concept for second-harmonic beam shaping taking advantage of a helically twisted nonlinear structure. Our results open new avenues for creating highly efficient advanced QPM devices.

We report the fabrication of femtosecond laser-induced, first-order waveguide Bragg gratings in lithium niobate in the low repetition rate regime. Type-II waveguides are written into an x-cut lithium niobate wafer and structured periodically to achieve narrowband reflections at wavelengths around 1550 nm. Additionally, electrodes are employed to allow for electro-optic tuning of the spectral response. We demonstrate wavelength control of the central reflection peak by applying a static external electric field. A maximum shift of the reflection peak of Δλ = 625 pm is observed.

We demonstrate second harmonic generation in quasi phase-matched waveguide structures fabricated by direct laser writing. Circular waveguides are inscribed in z-cut lithium niobate that provide well confined guiding of the fundamental and second harmonic wave. In contrast to classic schemes that employ periodically poled crystals, quasi phase-matching is realized by a laser-induced modulation of the nonlinearity inside the waveguide core. The proposed design allows monolithic integration of buried frequency conversion devices with tailored nonlinear response and excellent compatibility to on-chip optical elements. Second harmonic generation of 1064 nm radiation is demonstrated for different grating periods and associated matching temperatures. A maximum conversion efficiency of 5.72% is obtained for a 6 mm long, laser-induced quasi phase-matching grating.